Cotton stalks at four different particles sizes (<0.15 mm, 0.15–0.5 mm, 0.5–1.0 mm and 1.0–2.0 mm) were subjected to ionic liquid pretreatment via 1-ethyl-3-methylimidazolium acetate (EMIMAc) and 1-ethyl-3-methylimidazolium chloride (EMIMCl) followed by the enzymatic hydrolysis of pretreated biomass. The changes in crystalline structure, lignin content and digestibility of the pretreated samples were investigated in addition to the glucose yield obtained from cotton stalks. For EMIMAc pretreatment, the lowest glucose yield (57%) was obtained upon the pretreatment of cotton stalks having the smallest particle size prior to pretreatment (<0.15 mm) while cotton stalks with larger particle sizes gave higher glucose yields of which were at least 71%. On the contrary, EMIMCl pretreatment functioned more efficiently with cotton stalks having smaller particle sizes (<0.15 mm and 0.15–0.5 mm) where increasing the biomass particle size further caused a decrease in the glucose yield from approximately 49% to 33%, unlike the EMIMAc pretreatment. These differences in the glucose yields obtained for different ionic liquids suggest that the ideal particle size of biomass prior to pretreatment may change from one ionic liquid to another.
In this study, pine (Pinus radiata) pretreated with PIL, triethylammonium hydrogen sulfate (TEAHSO4) at different water-PIL ratios (1:9, 1:4 and 3:7), biomass loadings (10–60%) and biomass particle sizes (<1.18 mm, 1.18–1.76 mm and 1.76–2.40 mm) was enzymatically transformed into fermentable sugars. TEAHSO4 removed 52% lignin with pretreatment at 170 °C, 20% loading and 1:4 water-PIL ratio for 3 h, from biomass with the largest particle size. Reducing the water content of PIL solution enhanced delignification performance of PIL under the same conditions; cellulose content of the biomass increased 2-fold by extracting 59% lignin from pine. Compositional changes were supported with saccharification and characterization analyses. Utilizing 1:4 water-PIL ratio introduced more constructive pretreatment conditions with respect to the changes in lignin particle size distribution. Attaining favorable compositional changes for pine as a recalcitrant softwood motivated the contribution of PILs to IL based biorefineries.