To meet the special requirements of the third mirror adjustment system for an optical telescope, a 6-P-RR-R-RR parallel platform using offset RR-joints is designed with high precision, a large load-to-size ratio and high stiffness. In order to improve the adjustment accuracy and the stiffness of the whole mechanism, each rotating joint in the subchain is designed as a zero-gap bead shaft system. When compared with a traditional Hooke joint, the offset RR joint has certain characteristics, including large carrying capacity and easy processing and adjustment, that effectively reduce the risk of interference with the joint during rotation and increase the working space of the entire machine. Because of the additional variables introduced by the offset joints, the kinematics problem becomes much more complicated. Regarding the P-RRRRR series subchain, the kinematics model is established using the Denavit–Hartenberg parameter method and then solved by the numerical iteration method. The stiffness of the parallel platform is analyzed and tested, including static and fundamental frequency. Motion performance testing of the parallel platform is performed.
This paper presents an algorithm for solving the inverse dynamics of a parallel manipulator (PM) with offset universal joints (RR–joints) via the Newton–Euler method. The PM with RR–joints increase the joint stiffness and enlarge the workspace but introduces additional joint parameters and constraint torques, rendering the dynamics more complex. Unlike existing studies on PMs with RR–joints, which emphasize the kinematics and joint performance, this paper studies the dynamical model. First, an iterative algorithm is established through a rigid body velocity transformation, which calculates the input parameters of the link velocity and acceleration. A linear system of equations in matrix form is then established for the entire PM through the Newton–Euler method. By using the generalized minimal residual method (GMRES) to solve the equation system, all the forces and torques on the joints can be obtained, from which the required actuation force can be derived. This method is validated through numerical simulations using the automatic dynamic analysis of multibody systems software. The proposed method is suitable for establishing the dynamic model of complex PMs with redundant or hybrid structures.
The limb-driving force mutation of the modular combination parallel manipulator (MCPM) affects the alignment process of optical axis. In this paper, a novel optimization method based on the force mutation penalty term is proposed to solve the problem of driving force mutation. The kinematics and dynamics models of the manipulator are established using a modularization idea, reducing the complexity of the modeling process, and verified using co-simulation. Moreover, particle swarm optimization (PSO) is applied as an optimization tool. The effectiveness of the proposed method is confirmed by comparing it with the minimize-the-maximum and Moore–Penrose (M–P) methods, which are widely used to solve parallel manipulators with redundant drives.
20 October 2023 in Journal of Mechanisms and Robotics
The SDelta is a three-limb, six-degrees-of-freedom parallel kinematics machine, a pertinent candidate for high-speed operations by virtue of its simple architecture. The original design of the SDelta includes a planar base and moving platforms. Here, we propose a novel architecture for an improved SDelta, the orthogonal SDelta (OSD), with a cube-shaped orthogonal base platform. Inverse and forward position models are reported, along with singularity and dexterity analyses. Moreover, design parameters and mechanical constraints leading to a singularity-free workspace are provided. An evaluation of the system translational workspace and orientational capability, upon consideration of volume and dexterity, is included. The SDelta as well as a generic 6SPS mechanism (C, P, and S denote, respectively, the cylindrical, prismatic, and spherical kinematic pairs, the actuated pair is represented underlined, as P) are designed with the same parameters, then the performance of the SDelta, the OSD, and the 6SPS mechanisms are being compared. The results show that the orientational capability of the OSD is better than those of the 6SPS and the SDelta. Furthermore, the OSD has an average condition number of 2.9 over its translational workspace and 1.69 over a predefined effective regular workspace, which make the OSD a good candidate for operations that need both a high orientational capability and high dexterity.