The construction of pavements requires the complete identification of the soils in place and of the added materials. This identification consists in determining the class of the soils and in evaluating their bearing capacity through the California bearing ratio (CBR) index. Obtaining the CBR index is very costly in terms of time and financial resources, especially when it is a large-scale project. It thus leaves prospects of obtaining it by simpler processes; hence, it arises the need to find simpler processes compared to classical processes. This study develops models for predicting the CBR index from physical properties that are less complex to obtain, based on deep neural networks. To achieve this, three databases were used. A first database consists of the proportion of fines, the Atterberg limits and the Proctor references of the soils. A second database uses the methylene blue value instead of the Atterberg limits, and a third database uses only the proportion of fines and the Proctor soil reference. On each of the databases, a deep neural network model was developed using dense layers, regularization layers, residual blocks and parallelization in TensorFlow to predict the CBR value. Each model was formed by combining several deep neural networks developed according to specific architectures. To expedite training, the simulated annealing method was employed to optimize hyperparameters and define the optimal configuration for each network. The predictions obtained are correlated with the true values from 83.6 to 96.5%. In terms of performance, the models have a mean deviation ranging from 3.74 to 5.96%, a maximum deviation ranging from 12.43 to 16.2% and a squared deviation ranging from 0.781 to 2.189. The results suggest that the variable VBS has a negative impact on the accuracy of the networks in predicting the CBR index. The developed models respect the confidence threshold (± 10%) and can be used to set up a local or regional geotechnical platform.
Despite its importance as one of the key parameters in the design of structural elements, the modulus of elasticity (MoE) is one of the least researched areas in oil palm kernel shell (OPKS) concrete. In the present study, we determined the MoE of OPKS concrete, using micromechanical models based on the classic approaches of homogenisation of Hashin–Shtrikman (HS) and Mori–Tanaka (MT). The MoE values for OPKSC (fcu < 35 MPa and OPKS volume fraction < 42%) estimated using the HS and MT models in the literature showed a good correlation with the experimental values. An empirical linear correlation between the volume fraction of inclusions and the MoE was proposed. The results obtained can enable better control of the mix design of structural concrete based on the proportion of OPKS coarse aggregate in tropical countries producing palm oil.
Roads are critical infrastructure in multi-sectoral development. Any country that aims to expand and stabilize its activities must have a network of paved roads in good condition. However, that is not the case in many countries. The usual methods of recording and classifying pavement distress on the roads require a lot of equipment, technicians, and time to obtain the nature and indices of the damage to estimate the roadway’s quality level. This study proposes the use of pavement distress detection and classification models based on Convolutional Neural Networks, starting from videos taken of any asphalt road. To carry out this work, various routes were filmed to list the degradations concerned. Images were extracted from these videos and then resized and annotated. Then, these images were used to constitute several databases of road damage, such as longitudinal cracks, alligator cracks, small potholes, and patching. Within an appropriate development environment, three Convolutional Neural Networks were developed and trained on the databases. The accuracy achieved by the different models varies from 94.6% to 97.3%. This accuracy is promising compared to the literature models. This method would make it possible to considerably reduce the financial resources used for each road data campaign.