Chao Qi

Dr. Chao Qi

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 June 2023 in IEEE Journal of Oceanic Engineering
Verified
Journal Article
Closed access
FYFanlin Yang
Fanlin Yang
CQChao Qi
Chao Qi
DSDianpeng Su
Dianpeng Su
Yue MaYue Ma
Yue Ma
YHYan He
Yan He
JLJiaoyang Liu
Jiaoyang Liu
Airborne light detection and ranging (LiDAR) bathymetry (ALB) is an effective technique for seamless topobathymetric mapping in shallow water. A green laser beam spreads due to the forward scattering effect in the water column, which significantly influences the shape of seafloor reflected waveforms and further introduces bathymetric error. To quantitatively analyze the water column forward scattering effect, this study develops an ALB waveform simulator (ALBWS) based on the semianalytical Monte Carlo numerical simulation (MCNS) and Fournier–Forand (FF) phase function. The ALBWS is first verified by waveforms collected by the Chinese Academy of Sciences Mapper5000 and Optech Aquarius ALB systems around Yuanzhi Island in the South China Sea. Then, based on the ALBWS, the specific bathymetric error and received energy influenced by the forward scattering effect are quantitatively investigated under different system and environmental parameters. Please note that the bathymetric error is obtained by processing noiseless waveforms using the centroiding algorithm. The results indicate that, when the water quality varies from Type I (clear) to Type II (coastal) at a depth of 30 m, the bathymetric error due to the forward scattering effect alone increases from 40 cm to 70 cm, which no longer satisfies the requirements of IHO S44 Level 1a. To achieve more accurate bathymetric results, the ALB collection should be conducted in water areas where the particle size distribution slope is less than 3.91. Moreover, the ALB system can acquire higher bathymetric accuracy and received energy when the instantaneous field of view is approximately 3–11 times greater than the laser divergence angle. This study proposes a robust and flexible model to evaluate the scattering influence on ALB systems, which is not only beneficial for acquiring and processing ALB data but also helpful for optimizing the design of ALB system configurations.

5 October 2022 in IEEE Geoscience and Remote Sensing Letters
Verified
Journal Article
Closed access
CQChao Qi
Chao Qi
Yue MaYue Ma
Yue Ma
DSDainpeng Su
Dainpeng Su
FYFanlin Yang
Fanlin Yang
JLJiaoyang Liu
Jiaoyang Liu
Xiao Hua WangXiao Hua Wang
Xiao Hua Wang
Airborne LiDAR bathymetry (ALB) is a useful technology for seamless topobathymetric mapping, offering high acquisition rate and point density. However, in very shallow waters (< 2 m depths), it is sometimes difficult to discriminate the bottom waveform from the water surface waveform because they are overlapped in total green signals. To make them separable, we narrow the widths of bottom and surface waveforms through deconvoluting the system impulse response function from the total received signal. Specifically, the mean surface waveform and Richardson–Lucy deconvolution (RLD) are used to determine the initial Gaussian parameters of bottom and surface waveforms. These parameters are further iteratively optimized using the Levenberg–Marquardt (LM) algorithm. A water LiDAR (Wa-LiD) simulated dataset and an Optech Aquarius dataset are used to assess the performance. In the Aquarius dataset, the proposed method can effectively identify bottom points in very shallow waters (with a recall rate >90%). In the simulated dataset, the root mean square error of the laser travel time between the estimated and truth values is 0.22 ns (corresponding to 2.5-cm slant range). The results indicate that the proposed method provides a new solution for filling the bathymetric gap in very shallow water, which is very essential for topobathymetry mapping.

30 January 2024 in IEEE Geoscience and Remote Sensing Letters
Verified
Journal Article
Closed access
MZMeng Zhang
Meng Zhang
FYFanlin Yang
Fanlin Yang
RWRuifu Wang
Ruifu Wang
CQChao Qi
Chao Qi
Achieving high-precision, high-resolution monitoring of nearshore water depth is essential for addressing marine disasters and environmental variations. Synthetic Aperture Radar (SAR) imaging offers the advantage of all-day, all-weather observations of coastlines, and imaging is unaffected by water quality. The current depth inversion methods typically exhibit an MRE of around 10%, with spatial resolution typically ranging from hundreds of meters to kilometers. However, Random Forest(RF) can leverage extensive data and complex algorithms to integrate the high resolution of SAR images and the high precision of in-situ data into the inversion model. To address this, we have employed ETOPO2022, multibeam bathymetric, and SAR images to create a depth inversion dataset comprising 542588 data points. In order to leverage this dataset effectively, we implemented an RF model for depth inversion from satellite images. During the model establishment process, ETOPO2022 data served as the primary training dataset, while high-precision multibeam data compensated for the limitations of low spatial resolution and low accuracy in shallow depths. The inversion model achieved a mean relative error (MRE) of 3.72% and a root mean square error (RMSE) of 2.28m on an independent dataset. When the model is applied to a larger area, the overall trend of the inversion results is accurate. Compared to reanalysis data, the inversion model exhibits higher spatial resolution, approaching 20m×22m. It is worth noting that the model demonstrates a strong inversion capability, especially in challenging shallow water areas. When accounting for extraction errors, the model demonstrated a considerable tolerance for errors.

2 March 2026 in Marine Geodesy
Verified
Journal Article
Closed access
JCJunyu Che
Junyu Che
CQChao Qi
Chao Qi
HMHuadong Ma
Huadong Ma
HZHuiying Zheng
Huiying Zheng
DSDianpeng Su
Dianpeng Su
FYFanlin Yang
Fanlin Yang
Accurately obtaining depth information in shallow water areas of coastal zones, islands, and reefs, which are transitional zones between land and sea, is crucial in the fields of marine geodesy and...

17 July 2025 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
Verified
Journal Article
Open access
MZMeng Zhang
Meng Zhang
CQChao Qi
Chao Qi
JCJianbing Chen
Jianbing Chen
DSDianpeng Su
Dianpeng Su
XCXiaodong Cui
Xiaodong Cui
RWRuifu Wang
Ruifu Wang
Depth inversion is crucial for ocean exploration, with synthetic aperture radar (SAR) technology being a key tool due to its all-weather capabilities. However, SAR-based depth inversion typically has limited resolution, ranging from hundreds to thousands of meters, which restricts its use in fine-scale underwater topography studies. Therefore, we introduce super-resolution enhancement (SRE) technology to improve SAR-based depth inversion. Using the Case II waters off California coastline as a case study, we pair low-resolution ETOPO data with high-resolution (HR) multibeam data, employing the residual channel attention network to construct a depth SR model. Our key findings demonstrate that in these Case II waters, the SR model successfully enhances resolution from 180 to 90 m, achieving SSIM $>$ 0.94, PSNR $>$ 16.0 dB, and significantly improved accuracy (average RMSE: 4 m, MRE: 11.9%) compared to SAR direct inversion (RMSE: 5.4–8.3 m, MRE: 16.8–21.3%). The method we proposed indicates the integration of SAR-based depth inversion and SRE technology effectively retains original information while enhancing both spatial resolution and accuracy, demonstrating its efficacy in complex marine environments and providing a novel and effective method for HR marine surveying, thereby expanding SAR’s application potential in marine sciences.

6 June 2025
Verified
Other
Open access
PDF file
CQChao Qi
Chao Qi
JLJinhao Lv
Jinhao Lv
CGChunchun Gao
Chunchun Gao
SLShaoyu Li
Shaoyu Li
DSDianpeng Su
Dianpeng Su
FYFanlin Yang
Fanlin Yang
Arctic supraglacial lakes volume changes serve as critical indicators of global temperature fluctuations. Accurate lake depth measurements are essential for reliable volume estimation, yet traditional bathymetry methods (e.g., airborne LiDAR and shipborne sonar) face significant challenges and high costs in the harsh Arctic environment. This study introduces a novel approach using ICESat-2 (Ice, Cloud, and Land Elevation Satellite-2) and Sentinel-2 data to derive supraglacial lake bathymetry. By considering the varying reflectance characteristics across different spectral bands in the water column, we conduct a satellite-derived bathymetry (SDB) method based on spectral stratification using the Otsu algorithm (maximum between-class variance method). Integrating the spectral stratification method with the classical log-transformed linear regression model (Lyzenga model), we perform accurate bathymetric inversion on multispectral satellite imagery. To verify the effectiveness of the proposed method, we apply it to four representative lakes on the Greenland Ice Sheet (GrIS), using ArcticDEM (Arctic Digital Elevation Model) as reference data. Experimental results demonstrate improved accuracy compared to the classical Lyzenga model, with reductions in root mean square error (RMSE) and mean absolute error (MAE) by up to 13.0 % and 14.0 %, decreasing from 0.54 m to 0.47 m and from 0.43 m to 0.37 m, respectively. The enhanced accuracy and scalability of our approach improve the ability to monitor large-scale volume changes in Arctic supraglacial lakes, providing valuable insights into their response to climate change.