Friction stir welding (FSW) is a promising approach for the joining of magnesium alloys. Although many Mg alloys have been successfully joined by FSW, it is far from industrial applications due to the texture variation and low mechanical properties. This short review deals with the fundamental understanding of weak zones from the viewpoint of texture analysis in FSW Mg alloys, especially for butt welding. Firstly, a brief review of the microstructure and mechanical properties of FSW Mg alloys is presented. Secondly, microstructure and texture evolutions in weak zones are analyzed and discussed based on electron backscatter diffraction data and Schmid factors. Then, how to change the texture and strengthen the weak zones is also presented. Finally, the review concludes with some future challenges and research directions related to the texture in FSW Mg alloys. The purpose of the paper is to provide a basic understanding on the location of weak zones as well as the weak factors related to texture to improve the mechanical properties and promote the industrial applications of FSW Mg alloys.

In this study, the effect of the hot-cold rolling process on the evolution of the microstructure, texture and magnetic properties of strip-cast non-oriented electrical steel was investigated by introducing hot rolling with different reductions. The results indicate that hot rolling with an appropriate reduction, such as the 20% used in this study, increases the shear bands and {100} deformed microstructure in the cold roll sheet. As a result, in our study, enhanced η and Cube recrystallization texture and the improved magnetic induction were obtained. However, hot rolling with excessive reduction (36–52%) decreased the shear bands and increased the α-oriented deformation microstructure with low stored energy. It enhanced the α recrystallization texture and weakened the η texture, resulting in a decrease in the magnetic induction. In addition, hot rolling promoted the precipitation of supersaturated solid solution elements in the as-cast strip, thereby affecting the subsequent microstructure evolution and the optimization of its magnetic properties.