Guo Guo

Dr. Guo Guo

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2017 in AIP Conference Proceedings
Verified
Conference Paper
Open access
GGGuo Guo
Guo Guo
FSFeihu Sun
Feihu Sun
ZWZhifeng Wang
Zhifeng Wang
The solar tower concentrator is mainly composed of the central receiver on the tower top and the heliostat field around the tower. The optical efficiencies of a solar tower concentrator are important to the whole thermal performance of the solar tower collector, and the aperture plane of a cavity receiver or the (inner or external) absorbing surface of any central receiver is a key interface of energy flux. So it is necessary to simulate and analyze the concentrated time-changing solar flux density distributions on the flat or curved receiving surface of the collector, with main optical errors considered. The transient concentrated solar flux on the receiving surface is the superimposition of the flux density distributions of all the normal working heliostats in the field. In this paper, we will mainly introduce a new backward ray tracing (BRT) method combined with the lumped effective solar cone, to simulate the flux density map on the receiving-surface. For BRT, bundles of rays are launched at the receiving-surface points of interest, strike directly on the valid cell centers among the uniformly sampled mirror cell centers in the mirror surface of the heliostats, and then direct to the effective solar cone around the incident sun beam direction after reflection. All the optical errors are convoluted into the effective solar cone. The brightness distribution of the effective solar cone is here supposed to be circular Gaussian type. The mirror curvature can be adequately formulated by certain number of local normal vectors at the mirror cell centers of a heliostat. The shading & blocking mirror region of a heliostat by neighbor heliostats and also the solar tower shading on the heliostat mirror are all computed on the flat-ground-plane platform, i.e., projecting the mirror contours and the envelope cylinder of the tower onto the horizontal ground plane along the sun-beam incident direction or along the reflection directions. If the shading projection of a sampled mirror point of the current heliostat is inside the shade cast of a neighbor heliostat or in the shade cast of the tower, this mirror point should be shaded from the incident sun beam. A code based on this new ray tracing method for the 1MW Badaling solar tower power plant in Beijing has been developed using MATLAB. There are 100 azimuth-elevation tracking heliostats in the solar field and the total tower is 118 meters high. The mirror surface of the heliostats is 10m wide and 10m long, it is composed of 8 rows × 8 columns of square mirror facets and each mirror facet has the size of 1.25m×1.25m. This code also was verified by two sets of sun-beam concentrating experiments of the heliostat field on the June 14, 2015. One set of optical experiments were conducted between some typical heliostats to verify the shading & blocking computation of the code, since shading & blocking computation is the most complicated, time-consuming and important optical computing section of the code. The other set of solar concentrating tests were carried out on the field center heliostat (No. 78) to verify the simulated the solar flux images on the white target region of the northern wall of the tower. The target center is 74.5 m high to the ground plane.

1 January 2021 in AIMS Energy
Verified
Journal Article
Open access
PDF file
GGGuo Guo
Guo Guo
HWHao Wang
Hao Wang
ZWZhifeng Wang
Zhifeng Wang
XZXiliang Zhang
Xiliang Zhang
FSFeihu Sun
Feihu Sun
NWNan Wang
Nan Wang
Measuring solar flux distribution (also called flux mapping) of a large receiver is quite challenging. Lunar flux mapping measures the illuminance distribution on the receiver aperture and the direct normal lunar illuminance during moonlight concentration experiments to determine the concentration ratio distribution (CRD). This paper presents a new lunar flux mapping model to extend the applicability to parts of the lunar cycle where the moon is not full. A dish concentrator with a similar concentration ratio to a tower concentrator was built in Beijing and used for lunar flux mapping experiments. A general method of backward ray tracing with effective sun/moon shapes for simulation of CRD is developed. The moonshape image and the normalized error image are convolved in two dimensions using the Fast Fourier Transform to give the effective moon shape image. Several optical simulations and moonlight concentration measurements on the concentrator show good similarity in the effects of changes in light source shape between solar and lunar CRD images. This model recognizes the potential of a solar concentrator to enhance the similarity between the solar CRD and a lunar CRD and that the residual differences can be compensated to some extent by using the smoothing filtering of the lunar CRD image to approximate the expected solar CRD image. The cosine similarity between lunar and solar CRDs is a function of the cosine similarity between the corresponding light source shapes, which can be derived from the dish concentrator and shows promise for application to a large solar tower system.

15 March 2025 in Energies
Verified
Journal Article
Open access
PDF file
FXFen XU
Fen XU
YSYanpeng Sun
Yanpeng Sun
GGGuo Guo
Guo Guo
Predicting the solar flux density distribution formed by heliostats in a concentrated solar tower power (CSP) plant is important for the optimization and stable operation of a CSP plant. However, the high temperature and blackbody attribute of the receiver makes direct measurement of the concentrated solar irradiance distribution a difficult task. To address this issue, indirect methods have been proposed. Nevertheless, these methods are either costly or not accurate enough. This study proposes a ray tracing-assisted deep learning method for the prediction of the concentrated solar flux density distribution formed by a heliostat. Namely, a generative adversarial neural network (GAN) model using Monte Carlo ray tracing results as the input was built for the prediction of solar flux density distribution concentrated by a heliostat. Experiments showed that the predicted solar flux density distributions were highly consistent with the concentrated solar spots on the Lambertian target formed by the same heliostat. This ray tracing-assisted deep learning method can be extended to other heliostats in the CSP plant and pave the way for the prediction of the solar flux density distribution concentrated by the whole heliostat field in a CSP plant.

7 December 2024 in Actuators
Verified
Journal Article
Open access
PDF file
HLHui Li
Hui Li
ZWZhifeng Wang
Zhifeng Wang
JLJinping Li
Jinping Li
CWChunmeng Wu
Chunmeng Wu
GGGuo Guo
Guo Guo
CZCheng Zhang
Cheng Zhang
The effective treatment of the surface electrode is the core technology of an ionic polymer–metal composite (IPMC), and its preparation significantly affects the driving performance of the IPMC. Copper, which is inexpensive and has excellent electrical conductivity, was selected as the surface electrode material, and copper electrode IPMCs (Cu-IPMCs) were prepared via magnetron sputtering. Orthogonal experiments were performed to optimize the parameters of the preparation process. The indices of the deformation angle and surface resistance were used, and the sample electrodes’ surface morphology and elemental content were analyzed. The results showed that sputtering pressure was the major factor affecting two indices. The Cu-IPMC, prepared at a sputtering pressure of 0.9 Pa, sputtering time of 35 min, argon flow rate of 30 sccm, and sputtering power of 150 W, had a more minor surface resistance and a larger deformation angle under continuous direct current boosting. It required a sputtering time of 1.2 h, which was more than 10 times shorter than its chemically plated counterpart. It exhibited surface resistance in the 2–3 Ω/cm range, which was 23 times smaller than chemically plated platinum.

4 March 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
FXFen XU
Fen XU
YSYanpeng Sun
Yanpeng Sun
GGGuo Guo
Guo Guo
Predicting the solar flux density distribution formed by heliostats in a concentrated solar tower power (CSP) plant is important for the optimization and stable operation of a CSP plant. However, the high temperature and black-body attribute of the receiver makes direct measurement of the concentrated solar irradiance distribution a difficult task. To address this issue, indirect methods have been proposed. Nevertheless, these methods are either costly or not accurate enough. This study proposes a simulation-assisted deep learning method for the prediction of concentrated solar flux density distribution formed by a heliostat. Namely, a generative adversarial neural network (GAN) model using Monte Carlo ray tracing result as the input was built for the prediction of solar flux density distribution concentrated by a heliostat. Experiments showed that the predicted solar flux density distributions were highly consistent with the concentrated solar spots on the Lambertian target formed by the same heliostat. This ray-tracing assisted deep learning method can be extended to either heliostat in the CSP plant and pave the way for the prediction of the solar flux density distribution concentrated by whole heliostat field in a CSP plant.

1 January 2017 in AIP Conference Proceedings
Verified
Conference Paper
Closed access
DLDongqiang Lei
Dongqiang Lei
XFXuqiang Fu
Xuqiang Fu
DZDongming Zhao
Dongming Zhao
GYGuofeng Yuan
Guofeng Yuan
ZWZhifeng Wang
Zhifeng Wang
GGGuo Guo
Guo Guo
The paper describes the key performance and durability testing facilities of the parabolic trough receiver developed by Institute of Electrical Engineering, Chinese Academy of Sciences. The indoor heat loss test can be applied at 4-7 different temperature levels within 200-550 on receivers. The optical efficiency test bench consists of 12 metal halide lamps as the solar simulator and a 5 m length half-elliptical cylinder reflector with flat end reflectors. 3 ultra-precision temperature sensors are used in receiver each end to get the temperature difference. The residual gas analysis test bench is applied to analyze and predict the vacuum lifetime of the receiver. It can test the variations of composition and partial pressure of residual gases with temperature and time in the receiver annulus space by a high sensitivity quadrupole mass spectrometer gas analyzer. A coating accelerated ageing test bench, which is also used to test the thermal cycle, has been developed. This test bench uses the absorber tube of the recevier as the resistance heater to heat up the whole receiver. The coating lifetime can be predicted by the Arrhenius parameters. For the cycling test, the compressed air is used to directly cool the inner surface of the absorber tube. The thermal cycling test is performed with temperature cycles from 150 °C to 450 °C for 160 cycles. The maximum thermal cycling frequency is 8 cycles per day. The mechanical fatigue test bench is used to test the bellows and the glass-to-metal seals durability at the same time. Both bellows are expanded and compressed to 6.5 mm in turn with 10,000 cycles. A new rotating test bench was also developed to test the thermal efficiency of the receiver.