In this work, a 3-dimensional (3D) ray-tracing model is proposed. The model is specifically tailored for RFID applications by taking into account some of its unique characteristics. The proposed model can give accurate power predictions and is suitable for indoor RFID systems operating with low fade margins. The model has been verified by comparison with Method of Moments (MoM) and practical measurements. It is shown to achieve a high accuracy with significantly less computational complexity than MoM. An example application of the model is presented comparing the performance of two antennas with similar beam patterns but different axial ratio. The predicted tag detection rates (63% and 50%) are in good agreement with the experimental data (65% and 55%), showing the accuracy of the model and its improvement over previous models which are not able to handle axial ratio as accurately.
It is reported by an online research that Wi-Fi is chosen as the top thing people would not be able to live without. Therefore, it is necessary to continuously develop Wi-Fi technology. On one hand, further increase of Wi-Fi throughput in a legacy spectrum needs new approaches rather than just widening the band or increasing the number of spatial streams. On the other hand, a great research effort has been focused on vortex electromagnetic waves carrying orbital angular momentum (OAM) as a new degree of freedom to enhance the throughput of wireless communication systems. In this paper, we investigate the feasibility and channel capacity performance of an OAM array-based MIMO system in an indoor multipath environment. Numerical results validate that OAM array-based MIMO is superior to conventional MIMO no matter with water-filling power allocation or equal power allocation at any SNR. This result provides a promising possibility to further improve the performance of Wi-Fi.
Orbital angular momentum (OAM) at radio frequency (RF) provides a novel approach of multiplexing a set of orthogonal modes on the same frequency channel to achieve high spectral efficiencies. However, OAM communication system requires perfect alignment of the transmit and the receive antennas and this harsh precondition greatly challenges practical multiplexing gain of OAM system. In this paper, we propose a UCA-based multi-mode OAM reception method including the beam steering with the estimated angle of arrival (AoA) and the amplitude detection with the estimated distance. Both mathematical analysis and simulation results validate that the proposed OAM reception method can completely eliminate the effect of the misalignment error of a practical OAM channel and approaches the performance of an ideally aligned OAM channel.
With rapid development of intelligent vehicles, a wide range of wireless devices, such as radio reception (FM), navigation systems (GPS), satellite radio, mobile telephone, radars, are being installed. Driving safety is more and more affected by the performance of these wireless devices. Design Validation & Product Validation tests, which are vital to intelligent vehicles, are mainly bench tests and on-road tests for these systems. However, the open testing environment will unavoidably lead to test inconsistency due to diversity in humidity, temperature, shading condition and background noise. Anechoic chamber offers a better circumstance. This paper analyses the requirements of intelligent vehicle tests, sort out the tests that can be done in anechoic chambers, and put forward the challenges arise when doing this.