For many years, the number and losses of modes have restricted the large-scale application of hollow core photonic bandgap fibers (HC-PBFs) in data transmission. Researchers have successfully reduced fiber loss to an extremely low level; however, little attention has been given to the specific characteristics of the higher-order modes (HOMs) in HC-PBF. In this paper, the high-order mode characteristics of a 7-cell HC-PBF are investigated in detail, and the non-degenerate phenomenon of HE 21 is observed. Through an in-depth theoretical analysis by discussing the influence of the structural deformation of the fiber near the core on the high-order mode characteristics, the cause of the phenomenon is described. Thus, an optimized 7-cell HC-PBF for supporting 6 modes is developed. Additionally, the bending losses of all the HOMs in the fiber are measured. Marked bending loss is not observed even when the bending radius is as small as 0.5 cm, which is different from a solid core four-mode fiber. These findings will provide a reference for HC-PBF as a new type of few-mode fiber for the mode division multiplexing field.
Hollow-core anti-resonant fibers (HC-ANF) have the advantages of low scattering loss, wide bandwidth and simplicity of preparation, but are sensitive to bend, which limits their practical applications. On the contrary, hollow-core photonic bandgap (HC-PBGF) fibers have lower confinement loss and more robust bending characteristic, but exhibit unavoidable high scattering loss, influence of surface modes and stricter manufacturing processes. In this paper, a novel hollow-core hybrid cladding fiber (HC-HBCF) which consists of anti-resonant circular tubes of inner cladding and periodically arranged air holes of outer cladding is proposed and investigated numerically. The results show that combining the claddings of antiresonance and photonic bandgap guidance mechanisms can effectively reduce the mode confinement loss by five and six orders of magnitude compared to the fibers with two claddings alone respectively. The proposed HC-HBCF exhibits similar excellent low scattering loss and spectral flatness as the single-tube anti-resonant fiber. Specifically, the proposed HC-HBCF exhibits the confinement loss of 5×10 -5 dB/km at 1550 nm and a total loss of 0.1 dB/km from 1430 nm to 1770 nm. Meanwhile, the hybrid cladding fiber has an outstanding bending property with a bending loss of 0.16 dB/km at a small bending radius of 2 cm. The mode properties of HC-HBCF are also calculated and analyzed, indicating that the hybrid cladding fiber has a unique potential in controlling modal content.
The abrupt termination of periodic structures in hollow-core photonic bandgap fiber (HC-PBF) cladding introduces surface modes (SMs). This results in a high loss and small available bandwidth. This has become an important factor that restricts the development of HC-PBFs. For many years, there has been a lack of clear understanding of SMs. In this study, SMs were considered the main body of research. First, a pure HC-PBF platform was constructed to systematically observe the SMs inside the bandgap. The core wall was used as a control variable to achieve precise control of the SMs. The SMs are divided into two categories: fundamental and high-order SMs. We named the SMs and studied their characteristics, including the mode field shape, coupling bandwidth, and coupling speed. The coupling characteristics of SMs with different core diameters were compared and analyzed. Further, we compared the model with actual fiber to prove the practicality of the theoretical analysis. This study will deepen our understanding of HC-PBF and will have a positive impact on its development.
We propose and demonstrate a compact optical fiber sensor (OFS) based on a novel peanut-shaped structure. Mach-Zehnder interferometer (MZI) and surface plasmon resonance (SPR) are introduced by coating the sensing area with a gold film. The use of optical fiber precision cutting technology ensures the integrity of the core, which reduces the loss of the transmitted light compared to other similar structures. MZI is used for external temperature sensing, the results show that when the temperature range is 25-60°C, the temperature sensitivity is calculated as -43.6 pm/°C. SPR is used for external refractive index (RI) sensing, the results show that when the RI range is 1.333-1.393, the RI sensitivity is calculated as 2250.7 nm/RIU. These two channels are independent of each other, which solves the problem of cross-sensitivity. Finally, the feasibility of the sensor is verified by measuring the thermo-optical coefficient of the anhydrous ethanol. The measured value is in good agreement with the theoretical value, and the error is about 2.31%.
We propose and demonstrate a compact surface plasmon resonance (SPR) sensor based on an inner wall waveguide fiber (IWWF) for magnetic field sensing. The diameter of the central hole in the IWWF is 65 μm, which is propitious for metal deposition and infiltration of magnetic fluid (MF). We deposit a silver film on the inner surface of the IWWF by employing the silver mirror reaction method, and an evanescent field near the inner wall will excite SPR. MF is filled into the central hole of the IWWF, and the transmission spectrum will change with different magnetic field intensities by utilizing the tunable refractive index (RI) of the MF. The proposed sensor achieves a maximum sensitivity of 19.3 nm/mT in the magnetic field intensity range of 0.5–2.3 mT. The temperature sensitivity is measured to be −0.26 nm/°C in the temperature range of 25–50℃. Compared with other optical fiber magnetic field sensors, the sensor proposed in this paper has the advantages of simple structure, miniaturization, and high sensitivity, exhibiting great application potential.