Yuxin Yang

Dr. Yuxin Yang


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 October 2022 in Agriculture
Verified
Journal Article
Open access
PDF file
SCSilin Cao
Silin Cao
JXJianhua Xie
Jianhua Xie
HWHezheng Wang
Hezheng Wang
YYYuxin Yang
Yuxin Yang
YZYanhong Zhang
Yanhong Zhang
SWShihua Wu
Shihua Wu
We attempt to solve the current problems of high impurity content and the poor reliability of chain harrow type residual film recovery machines when picking up residual film. This study makes a device for picking up residual film with a hook-and-tooth chain rail. First, we conducted an analysis of the trajectory of the tip movement of the hooked teeth in the designed picking device, with the condition that the residual mulch does not miss the picking, and the force conditions of the residual mulch in the conveying process and the collection process are presented. Secondly, to determine the optimal working parameters of the picking device, a three-factor, three-level response surface optimization test was conducted with the machine forward speed, hook tooth entry depth, and chain harrow input speed as the test factors and the residual film picking rate and the impurity rate of residual film as the test indexes. In addition, a response surface regression model was developed to analyze the effects of the selected factors on the picking device. When the forward speed of the machine was 1.62 m/s, the hook tooth entry depth was 38.51 mm, and the input speed of the chain harrow was 241.42 rpm, the pickup rate and the impurity rate of the residual film were 88.27% and 9.96%, respectively. Finally, the simulation test was carried out under optimal working conditions, with the maximum force of the hook teeth being 60.7 N, the maximum deformation being 31.42 mm, and the maximum stress being 215.33 Mpa. This study can be used as a guide to further improve the design of the residual film recovery machine.

24 August 2022 in Agriculture
Verified
Journal Article
Open access
PDF file
HWHezheng Wang
Hezheng Wang
SCSilin Cao
Silin Cao
YLYongrui Liu
Yongrui Liu
YYYuxin Yang
Yuxin Yang
JXJianhua Xie
Jianhua Xie
PJPeng Ji
Peng Ji
This research aims to optimize the working parameters of the sawtooth-type recovery device for cotton fallen on the ground to enhance cotton’s recovery effect. Firstly, the cotton-picking mechanism and cotton unloading mechanism of the cotton recovery device were designed. The movement trajectory of the serrated tooth end of the designed device, the cotton non-missing picking condition, and the cotton unloading condition were noted. Secondly, virtual simulation technology developed a model of the interaction process between the picking equipment and the soil. To determine the optimal combination of operating parameters for the recovery device, a three-factor, three-level response surface optimization test was conducted using Box–Behnken’s central combination method with operating machine speed, spacing between serrated discs, and serrated disc speed as the test factors, and the picking and impurity rate as the test indexes. In addition, a response surface regression model was developed to analyze the effects of the selected factors on the recovery unit, and each factor was optimized. When the picking and impurity rates were 79.09% and 35.12%, respectively, the optimal operating speed of the machine was 0.96 m/s, the spacing of the serrated discs was 40 mm, and the speed of the serrated discs was 68 rpm. The relative error between the experimental findings and the theoretical optimized values was less than 5%, and the optimized working parameters were reliable. This study can provide a reference for the device used to recover cotton that has fallen to the ground.

1 August 2025 in Agriengineering
Verified
Journal Article
Open access
PDF file
YYYuxin Yang
Yuxin Yang
CNChanghe Niu
Changhe Niu
XSXin Shi
Xin Shi
JXJianhua Xie
Jianhua Xie
YJYongxin Jiang
Yongxin Jiang
DMDeying Ma
Deying Ma
In response to the need for separation and utilization of residual film mixtures after transformation of protaetia brevitarsis larvae, a pneumatic drum-sieve-type separator for transforming mixtures of protaetia brevitarsis larvae was designed. First, the suspension velocity of each component was determined by the suspension speed test. Secondly, the separation process of residual film, larvae, and insect sand was formulated on the basis of biological activities, shape differences, and aerodynamic response characteristics. Eventually, the main structural parameters and working parameters of the machine were determined. In order to optimize the separation effect, a single-factor experiment and a quadratic regression response surface experiment containing three factors and three levels were carried out, and the corresponding regression model was established. The experimental results showed that the effects of the air speed at the inlet, inclination angle of the sieve cylinder, and rotational speed of the sieve cylinder on the impurity rate of the residual film decreased in that order, and that the effects of the rotational speed of the sieve cylinder, inclination angle of the sieve cylinder, and air speed at the inlet on the inactivation rate of the larvae decreased in that order. Through parameter optimization, a better combination of working parameters was obtained: the rotational speed of the sieve cylinder was 24 r/min, the inclination angle of the sieve cylinder was −0.43°, and the air speed at the inlet was 5.32 m/s. The average values of residual film impurity rate and larval inactivation rate obtained from the material sieving test under these parameters were 8.74% and 3.18%, with the relative errors of the theoretically optimized values being less than 5%. The results of the study can provide a reference for the resource utilization of residual film and impurity mixtures and the development of equipment for the living body separation of protaetia brevitarsis.