AISI 4340 steel has applications in gun barrels, where the surface quality of the barrel is the prime factor. This study explores the application of a machine learning (ML) approach to optimize the precision turning of an AISI 4340 steel alloy using both conventional and wiper tool nose inserts under varying cutting parameters, such as cutting speed, depth of cut, and feed rate. The analytical framework integrates experimental machining data with computational algorithms to predict key output parameters: surface roughness (Ra) and material removal rate (MRR). A Multi-Objective Optimization based on Ratio Analysis (MOORA) method is used for data normalization. Particle swarm optimization (PSO) further refines the process by optimizing the input parameters to achieve superior machining performance. Results show that under optimized conditions, a 118 m/min cutting speed, 0.22 mm depth of cut, and 0.2 mm/rev feed, wiper inserts provide a 50% improvement in Ra compared to conventional inserts, highlighting their potential for enhancing both productivity and efficiency. At the suggested setting, the surface roughness values are 0.59 µm for wiper inserts and 1.30 µm for conventional inserts, with a material removal rate of 4996.96 mm3/min. The developed empirical model serves as a powerful tool for improving precision hard-turning processes across manufacturing sectors. The present work employs the XGBoost model of ML along with MOORA and PSO to predict and optimize machining outcomes, advancing hard-turning practices by delivering quantifiable improvements in surface quality, material removal rate, and operational efficiency.
This article investigates 3D bioprinting as an exciting solution to the problem of skin regeneration, emphasizing the possibility of eliminating the drawbacks of standard grafts. It covers the anatomy and functions of the skin and the need for synthetic skin for medical purposes. Existing substitutes are analysed, thereby exposing their drawbacks and constraints. This article discusses the concepts underpinning 3D bioprinting, bioinks used for the fabrication of the skin, and the manufacture of skin tissue constructs of several layers. The major issues are associated with vascularization and mechanical stability, while the forthcoming improvement of the integration of biomaterials, automation, and optimization based on AI will enable enhanced functionality and clinical applications. Skin 3D bioprinting offers a new perspective for the development of customizable and engineered skin grafts.
The main aim of the present research is to improve the tensile strength of lightweight aluminium alloy 6082, which makes it fit for many advanced engineering applications. Considerable efforts have been made to investigate the tensile characteristics, hardness, microstructural and fractography of AA6082/TiC/graphene composite developed at different reinforcements loadings varying from 1 wt.% to 6 wt. %. The reinforcements used in the current research are TiC and graphene. The aluminium matrix composite fabricated using nanosized particles by stir-casting route. The tensile strength increases with the increase of TiC and graphene particles in the AA6082 matrix up to certain limit i.e. 5 wt.%. Once the reinforcement increases beyond the point at which agglomeration of the particulates starts, the tensile strength and hardness of the developed composites decrease. The x-ray diffraction (XRD) and scanning electron microscopy (SEM) was used for the investigation of elements and morphology. The fractography of the developed composite depicts the morphology of the fractured tensile specimens. The elongated dimples, tear ridges and micro-voids are found during fractography. The failure of the hybrid composites changes from ductile fracture to cleavage failure.