This study evaluated the impact of the addition of spent coffee grounds (SCG) on the physicochemical and technological properties and sensory acceptance of gluten-free cookies. The addition of SCG increased the nutritional value of the products compared to control, but it altered the color parameters. The addition of 10% SCG improved the technological properties of the products (higher specific volume and spread ratio), but the fiber content was only slightly increased (0.5 g/100 g). The addition of 20% SCG improved the technological properties of the products and resulted in a product that could be classified as a source of fiber (4.11 g/100 g). Furthermore, suitable sensory acceptance (6.17–6.69 on a 9-point hedonic scale) and lower alterations on the color parameters were observed. The addition of 30% SCG compromised the spread ratio and color parameters of the products and decreased the sensory acceptance.
Losses resulting from food processing have encouraged the search for sustainable alternatives for the use of agro-industrial by-products. Melon is a fruit widely consumed in Brazil, but during its processing, by-products are generated, such as peels. This study utilized yellow melon peels to produce flour and incorporated it into the formulation of vegan and gluten-free muffins. Three muffin formulations were processed, with the partial replacement of rice flour by melon peel flour (MPF): Control (0%), F10 (10%), and F20 (20%). The flour and muffins were characterized according to their physicochemical properties. The muffins were evaluated based on color, texture, expansion factor, height, specific volume, and sensory acceptance. Considering the fiber and ash content (17.38 g/100 g and 10.14 g/100 g, respectively), MPF can be classified as a food with “high fiber and mineral content”. The specific volume of the muffins ranged from 1.403 to 1.756 cm3/g, with the lowest value found for the muffins made with the highest amount of MPF (F20). The muffins with 20% MPF had the lowest expansion factor (1.213 mm) due to the higher amount of fiber (4.45%). The most accepted sample was the F10 formulation (7.21), with an acceptance index of 88.88%.