Cooperative satellite-aerial-terrestrial networks (CSATNs), where unmanned aerial vehicles (UAVs) are utilized as nomadic aerial relays (A), are highly valuable for many important applications, such as post-disaster urban reconstruction. In this scenario, direct communication between terrestrial terminals (T) and satellites (S) is often unavailable due to poor propagation conditions for satellite signals, and users tend to congregate in regions of finite size. There is a current dearth in the open literature regarding the uplink performance analysis of CSATN operating under the above constraints, and the few contributions on the uplink model terrestrial terminals by a Poisson point process (PPP) relying on the unrealistic assumption of an infinite area. This paper aims to fill the above research gap. First, we propose a stochastic geometry based innovative model to characterize the impact of the finite-size distribution region of terrestrial terminals in the CSATN by jointly using a binomial point process (BPP) and a type-II Matérn hard-core point process (MHCPP). Then, we analyze the relationship between the spatial distribution of the coverage areas of aerial nodes and the finite-size distribution region of terrestrial terminals, thereby deriving the distance distribution of the T-A links. Furthermore, we consider the stochastic nature of the spatial distributions of terrestrial terminals and UAVs, and conduct a thorough analysis of the coverage probability and average ergodic rate of the T-A links under Nakagami fading and the A-S links under shadowed-Rician fading. Finally, the accuracy of our theoretical derivations are confirmed by Monte Carlo simulations. Our research offers fundamental insights into the system-level performance optimization for the realistic CSATNs involving nomadic aerial relays and terrestrial terminals confined in a finite-size region.
18 September 2024 in IEEE Transactions on Vehicular Technology
Flying ad hoc networks (FANETs), an innovative airborne networking paradigm, are expected to play a vital role in emerging military and civilian applications. However, the dynamic nature of flying nodes imposes significant challenges on efficient routing design. In this paper, considering the frequent changes of topology, we first define a stability indicator and an efficiency indicator for a link and use them as a prior knowledge to enhance the robustness and agility of route discovery. Then, we design a distributed hybrid proactive-reactive ant colony routing protocol tailored for highly dynamic FANETs. Our protocol unifies the data transmission and routing control processes. It gleans the benefits of both a multi-round reactive ant-sending mechanism and a proactive pheromone updating process. Hence, it is well adapted to highly dynamic scenarios while minimizing the routing overhead. Extensive simulation results with ns-3 show that our scheme comprehensively outperforms existing routing schemes in FANETs in terms of latency, packet loss rate, overhead and jitter, especially in highly dynamic scenarios.
15 January 2025 in IEEE Transactions on Communications
In harsh environments, such as mountainous terrain, dense vegetation and urban landscapes, a single type of unmanned aerial vehicles (UAVs) may encounter challenges like flight restrictions, difficulty in task execution or increased risk. Therefore, employing multiple types of UAVs to collaborate along with satellite assistance, becomes essential in such scenarios. In this context, we present a stochastic geometry based approach for modeling the heterogeneous non-terrestrial networks (NTNs) by using the classical binomial point process and introducing a novel point process, called Matérn hard-core cluster process (MHCCP) which possesses both properties of exclusivity and clustering. Through simulations, MHCCP has been validated as a more suitable model for UAV groups composed of multiple clusters, compared with traditional point processes such as Poisson point process, binomial point process, and Poisson cluster process. This is because MHCCP ensures inter-cluster repulsion while effectively capturing the clustered distribution observed in practical scenarios. Then, taking into account the influence of terrain shadows on the aerial-satellite links in low-altitude harsh environments, we derive closed-form expressions of the outage probability and average ergodic rate for the aerial-to-satellite uplink of heterogeneous NTNs. Unlike existing studies, our analysis adopts an advanced system configuration that combines beamforming with frequency division multiple access and incorporates a shadowed-Rician fading model to accurately capture signal fading under complex environmental conditions. Furthermore, we investigate link performance in the presence of co-channel interference. Monte Carlo simulations validate that the derived closed-form solutions of the outage probability and the average ergodic rate provide a precise quantitative tool for evaluating the reliability and transmission efficiency of the aerial-satellite links, offering deeper insights into system performance in complex environments.
The growing demand for reliable and extensive connectivity has made low Earth orbit (LEO) satellites aided Internet of Things (IoT) systems a critical area of research. However, current theoretical studies on IoT-over-LEO satellite systems often rely on unrealistic assumptions, such as infinite terrestrial areas and omnidirectional satellite coverage, leaving significant gaps in theoretical analysis for more realistic operational constraints. These constraints involve finite terrestrial area, limited satellite coverage, Earth curvature effect, integral uplink and downlink analysis, and link-dependent interference. To address these gaps, this article proposes a novel stochastic geometry based model to rigorously analyze the performance of IoT-over-LEO satellite systems. By adopting a binomial point process (BPP) instead of the conventional Poisson point process (PPP), our model accurately characterizes the geographical distribution of a fixed number of IoT devices in a finite terrestrial region. This modeling framework enables the derivation of distance distribution functions for both the links from the terrestrial IoT devices to the satellites (T-S) and from the satellites to the Earth station (S-ES), while also accounting for limited satellite coverage and Earth curvature effects. To realistically represent channel conditions, the Nakagami fading model is employed for the T-S links to characterize diverse small-scale fading environments, while the shadowed-Rician fading model is used for the S-ES links to capture the combined effects of shadowing and dominant line-of-sight paths. Furthermore, the analysis incorporates uplink and downlink interference, ensuring a comprehensive evaluation of system performance. The accuracy and effectiveness of our theoretical framework are validated through extensive Monte Carlo simulations. These results provide insights into key performance metrics, such as coverage probability and average ergodic rate, for both individual links and the overall system. Our study also offers an important analytical tool for optimizing the design and performance of IoT-over-LEO satellite systems with the operational constraints that are more realistic.
11 March 2025 in IEEE Transactions on Vehicular Technology
Designing high-performance routing protocols for flying ad hoc networks (FANETs) is challenging due to the diversity of applications and the dynamics of network topology. The existing general-purpose routing protocols for ad hoc networks often oversimplify mobility patterns and disregard the unequal importance of nodes, resulting in suboptimal routing decisions that are unsuitable for task-oriented FANETs. To break the bottleneck, in this paper we propose a betweenness centrality based dynamic source routing (BC-DSR) protocol for a flying ad hoc network (FANET) in marching formation. Firstly, we introduce a Gauss-Markov group (GMG) mobility model based on the leader-follower pattern, which accurately captures the temporal and spatial correlations of node movements in the realistic marching formation. Besides, we exploit the concept of BC defined in graph theory to measure the structural unequal importance of relay nodes, i.e., to determine link weights, in the particular marching formation topology. The path of least cost is calculated relying on a weighted directed graph constructed. The ns-3 based simulation results demonstrate that our BC-DSR protocol achieves higher packet-delivery ratio and lower average end-to-end latency and routing overhead ratio than representative benchmark protocols used in FANETs, while maintaining a reasonably small network jitter.
With the explosive growth of unmanned aerial vehicle (UAV) applications in numerous fields, low-altitude networks face formidable challenges in monitoring. In this context, integrated sensing and communication (ISAC) networks through three-dimensional (3D) wide-area sensing have emerged as the key solution. However, the differences in networking mechanisms between communication and sensing, along with the transition from two-dimensional (2D) to 3D networking, complicate the realization of seamless 3D sensing. We aimed to address these challenges by analyzing the sensing capabilities of a single base station and the disparities between communication and sensing. Based on this, an innovative 3D sensing model for ISAC single base stations was proposed, defining the sensing boundaries and providing a foundation for designing the key parameters of ISAC base stations. Additionally, a multi-base station (multi-BS) low-altitude networked 3D sensing cellular-like architecture was proposed, overcoming the limitations of traditional 2D networks and achieving seamless 3D sensing. To validate the effectiveness of the model, comprehensive tests were conducted in both controlled laboratory conditions and real-world commercial network environments. The results show that the model successfully achieved stable and continuous sensing with the expected coverage and accuracy in networked environments.