Objective : The objective of this work is to study the effects of porosity on mechanical and piezoelectric properties of polyvinylidene fluoride (PVDF) films for biomedical applications. Impact Statement: By investigating the piezoelectric properties of PVDF and the porosity effect on its electromechanical performance, there is potential for further development of PVDF as a hemodynamic sensor that can lead to further technological advancements in the biomedical field, benefiting patients and physicians alike. Introduction : PVDF thin films have shown potential in the application of hemodynamic flow sensing and monitoring the effects on blood flow caused by prosthetic valve implantation via the transcatheter aortic valve replacement operation. The piezoelectric performance of PVDF films can be influenced by the porosity of the material. Methods : In this study, strain tracking was performed on thin film PVDF specimens with various levels of porosity and pore sizes to determine the mechanical properties of the specimens. The mechanical properties were used to model the PVDF material in COMSOL multiphysics software, in which compression test simulations were performed to determine the piezoelectric coefficient d33 of the PVDF. Results : A decline in the elastic modulus was found to be highly inversely correlated with porosity of the specimens and the simulation results show that elastic modulus had a much greater effect on the piezoelectric properties than Poisson’s ratio. Conclusion : A combination of experimental and computational techniques was able to characterize and correlate the mechanical properties of PVDF films of varying porosities to their piezoelectric properties.
18 August 2015 in Journal of Intelligent Material Systems and Structures
A novel cement–sand-based piezoelectric smart composite was developed for conducting structural health monitoring for civil structures. To overcome the incompatibility between piezoelectric materials and reinforced concrete containing cement and sand, for the first time, sand was used to fabricate the new composite in this study. Two sets of specimens containing 30 and 50 vol% lead zirconate titanate were prepared using normal mixing and spread methods, followed by the characterization of the properties of the composites. The composite exhibited desirable piezoelectric strain and voltage coefficients. Furthermore, the dielectric constant and loss of the composite were also determined. The results indicated that the piezoelectric effect and dielectric constant were enhanced with increasing lead zirconate titanate content. Compressive tests were conducted to study the sensing effect of the composite. The investigation demonstrated the feasibility of using the new composite as sensors in structural health monitoring systems to prevent possible failure of civil structures.
Cymbal piezoelectric energy harvesters offer an effective platform for converting mechanical vibrations into electrical energy due to their ability to exploit both longitudinal (d33) and transverse (d31) piezoelectric coefficients. However, the design of flexible cymbal structures that ensure efficient stress transfer to polymer-based piezoelectric materials remains insufficiently explored. In this study, a bridge-like cymbal harvester incorporating polyvinylidene fluoride (PVDF) films as the active layer was designed, fabricated, and experimentally investigated. To support the design process and reduce the computational burden associated with evaluating multiple geometric configurations, we developed a novel machine learning methodology that integrates singular value decomposition (SVD) with metamodeling. This framework provides rapid predictions of resonance behavior and electrical response from key design parameters. The findings demonstrate the feasibility of PVDF-based cymbal harvesters for flexible energy harvesting applications and establish an efficient data-driven approach for guiding future design optimization.