The Xigeda Formation has the characteristics of poor cementation, variable structure, and softening in water. It is prone to lead to failure of the initial support structures, arch collapse, and even roof fall. The key to the problem lies in the exploration of the interaction between surrounding rock and support. Therefore, based on the constraint loss theory of the tunnel face space effect, this paper constructively introduces multiple dependent variables, including the intermediate principal stress, the dilatancy of the surrounding rock, the timeliness of the shotcrete support stiffness, and the water content of the Xigeda formation, to decouple the whole process of the interaction between the surrounding rock and support, and discusses the influence of each variable. The research results show that: i) there is a critical support point in the tunnel under the influence of the unified strength theoretical parameter b and water content, and when the unified strength theoretical parameter b is constant, the critical distance of the support will decrease with the increase of the water content; ii) from the perspective of deformation control, the stress of support structure will increase with the increase of dilatancy angle of Xigeda surrounding rock; iii) considering the hardening characteristics of shotcrete, the initial support stiffness of Xigeda tunnel increases nonlinearly, and the whole process of stress and deformation can be divided into four stages; iv) the combined support structure of section steel and grille has little difference in the deformation control effect of the surrounding rock and the stress of the support structure, but the combined support structure of the grille steel frame is more sensitive to the hardening parameters.
29 August 2023 in Bulletin of Engineering Geology and the Environment
Artificial Ground Freezing Method (AGF) is an efficient, environmentally friendly reinforcement method for the construction of metro connecting passage in water-rich and weak stratum. The core of AGF is the design of frozen wall thickness and freezing temperature. In order to obtain the quantitative relationship between the freezing temperature and the frozen wall thickness, this study firstly equates the frozen wall to a rectangular frame mechanical model based on the stress state of the frozen wall formed by AGF. And then the calculation method of frozen wall thickness based on strength conditions is obtained by theoretical estimation. Furthermore, based on the relationship between the strength of the frozen soil and the freezing temperature obtained from the experiment, the freezing temperature and the frozen wall thickness are related to propose a frozen wall thickness design method considering the freezing temperature. In addition, experimental studies revealed that the compressive strength and shear strength of frozen soil increase linearly as the freezing temperature decreases. Secondly, the lower the freezing temperature, the smaller the frozen wall thickness required. Notably, the relationship between the frozen wall thickness and freezing temperature formed by the AGF method can be obtained through the design method proposed in this paper. Taking actual case as an example, when the frozen wall thickness is selected from 1.2 to 2.2 m, the required freezing temperature range is (−5) to (−25)°C. Finally, the feasibility of the designed freezing parameters in the connecting passage construction is verified through numerical simulation and field measurement, which shows that the design method has a promotion prospect.
Xu, H.; Cai, L.; Shao, Z.; Wang, Z.; Li, Z., and Huang, C., 2021. Prediction of shear strength of fully weathered coastal red sandstone: Influence of water content, fine content, and relative compaction. Journal of Coastal Research, 37(4), 827–841. Coconut Creek (Florida), ISSN 0749-0208.Shear strength of coastal rock mass can be characterized by parameters such as cohesion and internal friction angle, which are relatively difficult to measure with accuracy on coastal engineering sites. This paper aims to predict shear strength of fully weathered coastal red sandstone with physical property parameters—water content, fine content, and relative compaction—that are easily measured on site. The variation of shear strength parameters with physical property parameters was obtained with indoor direct shear tests, and the real-time prediction of shear strength of fully weathered coastal red sandstone was realized by employing a decision tree model. The results show that the variation of shear strength parameters with physical properties can be accurately characterized by cubic polynomials and that the cohesion and internal friction angle can be well predicted by a 10-layer decision tree model with high accuracy. This study sheds light on the variation of shear strength of fully weathered coastal red sandstone and similar rock mass with physical properties and has practical significance for engineering conducted in such strata, which require in-time monitoring of shear strength of rock mass.