In the present study, phosphorus removal was studied using as coagulant spent alum sludge from a water treatment plant of EYDAP (Athens Water Supply and Sewerage Company) and compared to alum (Al2(SO4)3•18H2O), iron chloride (FeCl3•7H2O), iron sulfate (Fe2(SO4)•10H2O) and calcium hydroxide (Ca(OH)2) at a constant pH (equal to 6).The comparison was based on their efficiency to remove phosphorus in synthetic wastewater consisting of 10mg/L P as potassium dihydrogen phosphate and 50mg/L N as ammonium chloride. The experiments were carried out using a jar-test apparatus and the measurements were performed according to the Standard Methods for the Examination of Water and Wastewater. Pure alum, iron chloride and iron sulfate were much more efficient in phosphorus removal than the spent alum sludge but in the case of calcium hydroxide, phosphorus removal was very low in pH=6. Specifically, orthophosphate were totally removed by alum using 15mg/L as Al, by alum sludge using 75mg/L as Al and by FeCl3•7H2O or Fe2(SO4)• 10H2O using 30mg/L of Fe while in the case of calcium hydroxide P removal was actually zero. pH measurements showed that the uptake of phosphates is associated to the release of OH ions in the solution and that the end of P uptake is accompanied by the stabilization of pH. Finally this spent alum sludge was tested on municipal wastewater and proved to be effective as apart from phosphorus it was shown to remove turbidity and COD.
31 July 2002 in Journal of Environmental Science and Health, Part A
In the present study, the coagulation of paint industry wastewater was examined. Ferrous and aluminum sulphate and polyaluminum chloride (PACl) were used as coagulation agents and the influence of ...
29 November 2023 in Environmental Science and Pollution Research
Water and energy use, along with wastewater reuse, are critical for sustainable industrial production. This study develops a decision support framework (DSF) to assess wastewater treatment and reuse, incorporating Water and Carbon Footprint indicators. The framework is applied to a Greek brewery producing 1.4 × 106 hL of beer annually, with a total water consumption of 5.6 hL per hL of beer and an in-house wastewater treatment plant (WWTP). The WWTP consumes over 40% more energy than expected, indicating a need for efficiency improvements. An advanced wastewater treatment method is proposed, capable of treating 43% of the total wastewater volume, with 3% covering the brewery’s utility water demand and the rest allocated to restricted irrigation. This reduces the operational Water Footprint by 12% and the supply chain Water Footprint by 1%, while increasing energy use by 3%. The optimal scenario, integrating water reuse and energy efficiency improvements, results in a 35% reduction in the Carbon Footprint, a 10% decrease in the operational Water Footprint, and a 1% reduction in the supply chain Water Footprint. The DSF provides a structured approach for industries to optimize sustainability by balancing water reuse with energy efficiency.
Adsorption of aqueous n-butyl mercaptan on Granular/Powder Activated Carbon is studied at pH 5-12.4 and 301 K/313 K. In GAC mercaptan blocks micropores and mesopores, whereas in PAC the broader mesopores remain intact providing access to micropores. Mercaptan is transformed into isomer disulfides and non-extractable sulfur forms following acid-base or oxidation-reduction reaction depending on carbon surface groups and iron, and dissolved oxygen. Adsorption obeys a Langmuir isotherm, with oxygen competing with mercaptan (<100 mg mercaptan/L), followed by a Dubinin-Raduschkevich isotherm. Mercaptan uptake increases with temperature. Free energy values suggest that the Langmuir part represents hydrogen bonds whereas the Dubinin-Raduschkevic part the van der Waals ones.