The migration of hindered phenolic antioxidants from food contact materials (FCMs) into foodstuffs poses health risks due to endocrine disruption and organ toxicity. Hence, the development of a high-efficiency analytical method for hindered phenolic antioxidants is of great importance for food safety. This study developed a novel ultrasound-assisted dispersive solid-phase filter extraction (d-SPFE) coupled with green supercritical fluid chromatography (SFC) method for the simultaneous determination of six representative hindered phenolic antioxidants. Under optimized conditions, the method achieved high extraction efficiency, with the complete separation of all analytes within 10 min. A wide linearity range (0.02–2.0 μg/mL) was achieved, with coefficients of determination all greater than 0.9996. The limits of detection (LOD, S/N = 3) and limits of quantification (LOQ, S/N = 10) were 2.4–3.6 ng/mL and 8–12 ng/mL, respectively. Validation tests demonstrated precise spiked recoveries (89.4–101.6%), with intra-day and inter-day relative standard deviations (RSDs) all less than 10%. The d-SPFE-SFC synergy significantly outperforms conventional techniques in terms of analysis speed and eco-efficiency. Successful application to food simulants confirms its reliability in monitoring hindered phenolic antioxidant migration from FCMs. This green and rapid methodology will enable the direct assessment of migration risks.
Bisphenol A diglycidyl ether (BADGE) and its related derivatives (BADGEs for short) are reactive epoxides condensed from bisphenol A (BPA) and epichlorohydrin. Nowadays, they are heavily used as additives in the production process of food and beverage contacting materials. However, BADGEs are considered as emerging organic pollutants due to their high toxicity including cytotoxicity, mutagenicity, and genotoxicity. In this work, an online analytical method integrated column-switching technique with supercritical fluid chromatography (SFC) was proposed for the simultaneous determination of bisphenol A diglycidyl ether and its derivatives. In this process, a homemade column was utilized in the first dimension of the column-switching SFC system to preconcentrate the analytes as well as eliminate interferences online. Under the optimal conditions, the obtained calibration curves for BADGEs showed good linearity ranging from 0.02 μg/mL to 10.00 μg/mL, while the values of LOD and LOQ were in the range of 0.0024–0.0035 μg/mL and 0.0080–0.0116 μg/mL, respectively. The optimized method exhibited a good recovery ranging from 85.6% to 105.5% with relative standard deviations less than 11.8%. The developed method provides an eco-friendly and effective way for the rapid and automated analysis of BADGEs at trace levels in canned beverages and can be applied to the high-throughput analysis of other similar matrices.
Angiotensin II receptor blockers (ARBs), a critical class of second-generation antihypertensive drugs, require azide intermediates for constructing their biphenyl tetrazole pharmacophore. This synthetic reaction introduces hypertoxicity risks, as residual azides can induce fatal damage even at trace concentrations. The pharmacopoeias of most countries have highlighted the urgency for improved detection paradigms of the control of azides in ARBs. Current ion chromatography (IC) methods face analytical challenges due to matrix interference from organic solvents and incompatibility with hydrophobic ARB ingredients. Herein, an in situ matrix elimination ion chromatography methodology was established for the sensitive detection of trace azides in angiotensin II receptor blocker pharmaceuticals. The switching strategy used in the proposed methodology eliminates organic interference and avoids the incompatibility issue with ARB ingredients. Under the optimal conditions, the proposed method exhibited satisfactory linearity in the range of 2.0–200.0 ng/mL, with a correlation coefficient of 0.9996. Validation studies demonstrated a detection limit (LOD, S/N = 3) of 0.57 ng/mL and a quantification limit (LOQ, S/N = 10) of 1.89 ng/mL, surpassing the sensitivity requirements in pharmacopeias. Method robustness was confirmed, with recovery rates from 92.8 to 108.7% using spiked ARBs real samples, and the intra-day and inter-day RSDs were less than 9.7%. The proposed approach establishes a reliable, precise, and sensitive alternative for monitoring azide impurities in ARBs, and such a framework can overcome limitations such as solubility issues, contributing to a universal applicability to diverse hydrophobic drugs.
In order to accelerate the pace of “going global” of technical standards in China's power industry and implement the strategy of “going global” of standards, this paper conduct in-depth research from two dimensions of organization application landing and key points of application, provide the Working Group (WG), Technical Committee (TC), Sub-technical Committee (SC) and other specific application paths, and integrate relevant international standards organizations, technical management paths of domestic and international standardization organizations into the application process of ISO/IEC, so as to effectively guide the application work of ISO/IEC. To improve the success rate of our application to the International Organization for Standardization.
Due to the ultra-trace concentrations of perfluoroalkyl compounds (PFCs) existing in environmental aqueous matrices, it is imperative to develop sensitive and high-enrichment-efficiency approaches for the determination of these emerging pollutants. In this study, a nitrogen-doped carbon dot-functionalized hollow fiber membrane (NCDs@HFM) was fabricated and employed in solid-phase microextraction (SPME) mode for the simultaneous identification of eight perfluoroalkyl carboxylates (PFCAs). The NCDs@HFM offers several advantages, including multiple active binding sites, chemical durability, a large specific surface area and environmental compatibility. Owing to these properties, the NCDs@HFM-based SPME demonstrated high extraction efficiency for PFCAs, where enrichment factors for target molecules could reach 35–61 fold under the optimum conditions. This established method was then integrated with liquid chromatography–tandem mass spectrometry (LC-MS/MS) for the qualitative and quantitative analysis of eight representative PFCAs in drinking and environmental water samples. The limits of detection (LODs, S/N = 3) and quantitation (LOQs, S/N = 10) of the method were at the scale of 0.0018–0.015 μg/L and 0.006–0.050 μg/L, respectively. This proposed method exhibited good precision, with RSDs below 13.2% and satisfactory accuracy, with recoveries ranging from 70.6% to 122.5%. The developed method was successfully applied in the identification of eight typical PFCAs in drinking and environmental water samples. This method exhibits several merits, including low cost, high sensitivity, good reliability and reusability, representing a promising alternative for measuring trace levels of PFCAs in aqueous matrices.