Refractory high-entropy alloys (HEAs) have excellent mechanical properties, which could make them the substitutes of some superalloys. However, the high melting point of refractory HEAs leads to processing problems when using traditional processing techniques. In this study, a single BCC solid solution of NbMoTaW alloy was formed by selective laser melting (SLM) with a linear energy density of up to 2.83 J/mm. The composition distribution was analyzed, and the element with a lower melting point and lower density showed a negative deviation (no more than 5%) of the molar ratio in the formed alloy. The HEA shows an excellent microstructure, microhardness, and corrosion resistance performance compared with traditional superalloys, making it a new substitute metal with great application prospects in aerospace and energy fields.

In an abruptly changing velocity under directional solidification, microstructures and the growth orientation of Al-Al₂Cu eutectic lamellar were characterized. The change in solidification rate led to an interfacial instability, which results in a bifurcation of the eutectic lamella into new, refined lamellae. The growth orientation of the eutectic Al₂Cu phase was also only in its (001) direction and more strongly oriented to the heat flow direction. The results suggest that the eutectic lamellar Al-Al₂Cu bifurcation and the spacing adjustment may be caused by the rate determining lateral diffusion of the solutes after interfacial instability.