In this work, a detailed numerical simulation is carried out to model the current–voltage characteristics of a nickel/ β -Ga 2 O 3 Schottky barrier diode at different temperatures. These SBDs are produced using confined magnetic-field-based sputtering to deposit the nickel (Ni) Schottky contact of the diode. This method reduces the thickness of the defect area created by plasma and argon bombardment, and consequently, the electrical characteristics are less affected by temperature changes or annealing (i.e. the device is more stable). During annealing, Ni diffuses into β -Ga 2 O 3 . A model for this diffusion is proposed in this work, in which Ni diffusion reduces the defects produced by plasma and argon bombardment by filling the Ga vacancy. Furthermore, Ni diffusion produces a new interfacial compound, namely at the interface between the Ni and the β -Ga 2 O 3 . This new compound layer has different properties than those of β -Ga 2 O 3 , in particular, those of the bandgap and the affinity. Finally, the temperature-dependent current-density–voltage ( J – V ) characteristics are simulated, taking the proposed model into account. A good agreement with measured values is achieved, especially at low forward voltages, which demonstrates the soundness of the proposed model.
In this work, the temperature-dependent parameters of Ni/ β -Ga 2 O 3 Schottky barrier diode (SBD) were analyzed and modeled. The simulation is to elucidate the physical phenomenon behind this temperature dependence. At room temperature, the deviation of SBD parameters from the ideal case is due to the Schottky barrier height ( inhomogeneity. A model is developed for this inhomogeneity in which an interfacial defected layer (IDL) is formed. Defects (extrinsic states) are related to plasma and Ar atom bombardment used in the confined magnetic field-based sputtering to realize the Ni Schottky contact diffusion in β -Ga 2 O 3 . Ni diffuses, upon annealing, to compensate defects in this IDL. It was found that the Schottky barrier height ( ) and threshold voltage decrease with increasing temperature. This decrease is related to intrinsic and extrinsic states (plasma and Ar bombardment). However, the ideality factor ( η ) increases which is related to the series resistance ( RS ) increase. The increase is related to the interfacial layer and nickel resistance increase with increasing temperature.