PbSe is a simple binary compound that has been studied extensively for use as a promising moderate-temperature thermoelectric material. In this Letter, we report the observation of the light-induced transverse thermoelectric (TTE) effect in c-axis inclined PbSe thin films that were grown epitaxially on c-axis miscut SrTiO3 single crystal substrates using the pulsed laser deposition technique. Because of the anisotropic Seebeck coefficient of these inclined PbSe thin films, high TTE voltage signals were detected when the film surfaces were irradiated using various different continuous-wave lasers with wavelengths ranging from the ultraviolet (360 nm) to the far infrared (10.6 μm). In addition, the amplitudes of the output voltage signals showed good linear dependence on both the radiation power density and the film inclination angle. The results above demonstrate the potential of PbSe for self-powered ultra-broadband light detection applications.
BiCuSeO has emerged as a highly promising material for transverse thermoelectric (TTE) applications, with its performance significantly enhanced through La doping. In this study, we investigate the effect of inclination angle on the TTE performance of inclined Bi0.94La0.06CuSeO thin films fabricated using the pulsed laser deposition technique. A huge output voltage of 31.4 V was achieved in the 10° inclined Bi0.94La0.06CuSeO film under 308 nm ultraviolet pulsed laser irradiation. Furthermore, the films also exhibited significant response with excellent linearity when exposed to continuous-wave lasers across a broad spectral range (360 nm to 10,600 nm) and a point-like heat source. Notably, the voltage is directly proportional to sin2θ, where θ is the inclination angle. These findings not only provide a clear optimization strategy for TTE performance through inclination angle engineering but also highlight the material’s great potential for developing high-performance optical and thermal sensing TTE devices.