The particle classification in the enhanced gravity field generated by the Knelson concentrator was studied in this paper. Three main test parameters, namely rotation speed, backwash water pressure, and solid mass percentage, that affected the classification performance of the Knelson concentrator for the classification tests of quartz and synthetic ore, which consisted of quartz and magnetite, were investigated. The yield of quartz concentrate increased with the rotation speed and decreased with the solid mass percentage and backwash water pressure. A lower backwash water pressure and solid mass percentage could improve the classification efficiency. The classification performance of the Knelson concentrator was comparable to that of the traditional hydrocyclone, with a classification efficiency of 76.84% and cut size of 49 μm when the solid mass percentage was 16.67%, the backwash water pressure was 50 kPa, and the rotation speed was 3600 rpm. The classification performance of quartz in synthetic ore tests was inferior to the single quartz tests, and the magnetite showed a better classification efficiency than the quartz with the same combination of test parameters. This study revealed the classification performance in the separation process of the Knelson concentrator in detail, which was beneficial for clarifying the migration rule of fine-grained minerals in the enhanced gravity field.
The elastic modulus of basalt fibers is closely associated with their chemical composition. In this study, eight machine learning models were developed to predict the elastic modulus, with hyper-parameter tuning implemented through the GridSearchCV technique. Model performance was evaluated using the coefficient of determination (R2), root-mean-square error (RMSE), and mean absolute error (MAE). SHAP analysis was employed to uncover the relevance of oxide compositions and their interactions with the elastic modulus. Among these models, the Categorical Boosting algorithm exhibited the best results, with an R2 of 0.9554, an RMSE of 4.7556, and an MAE of 2.0323. SHAP analysis indicated that CaO had the most significant influence on elastic modulus predictions. The importance of other oxides was ranked as follows: SiO2, Al2O3, MgO, K2O, Na2O, Fe2O3, FeO, and TiO2. Additionally, SHAP analysis determined oxide ranges for positive elastic modulus prediction. This research provides new insights into leveraging machine learning to optimize the mechanical properties of basalt fibers.
19 July 2026 in International Journal of Coal Preparation and Utilization
The efficient and clean utilization of coal relies heavily on coal preparation processes, with wet coal beneficiation remaining the most widely applied and technically mature method worldwide (Chai...