In this work, we established a one-step strategy to synthesize three-dimensional porous graphitic biomass carbon (PGBC) from bamboo char (BC), and studied its electrochemical performance as electrode materials for supercapacitors. Using potassium ferrate (K2FeO4) to fulfil the synchronous carbonization and graphitization of bamboo carbon, this method is less time-demanding, highly efficient and pollution-free, when compared with a conventional two-step strategy. The as-prepared PGBC sample possessed a porous structure with a large specific surface area (1732 m2 g−1) and abundant micropores, as well as a high graphitization degree demonstrated by XRD and Raman. Further electrochemical measurements revealed that the PGBC electrode exhibited a high specific capacitance of 222.0 F g−1 at 0.5 A g−1, and the solid-state symmetric supercapacitor in an aqueous electrolyte (KOH/PVA) presented considerable synergetic energy–power output properties with an energy density of 6.68 W h kg−1 at a power density of 100.2 W kg−1, and 3.33 W h kg−1 at 10 kW kg−1. Moreover, the coin-type symmetric supercapacitor in an ionic liquid electrolyte (EMIM TFSI) delivered a higher energy density of 20.6 W h kg−1 at a power density of 12 kW kg−1. This approach holds great promise to achieve low-cost, green and industrial-grade production of renewable biomass-derived carbon materials for advanced energy storage applications in the future.
1 October 2015 in Progress in Natural Science: Materials International
The influence of variant graphenes on electrochemical performance for supercapacitors was studied comparatively and systematically by using SEM, FTIR and Raman spectroscopy, cyclic voltammetry (CV), galvanostatic charge/discharge and electrochemical impedance spectroscopy (EIS). The results revealed that: 1) the nitrogen-doped graphene (N-G) electrode exhibited the highest specific capacitance at the same voltage scan rate; 2) the specific capacitance of the N-G reached up to 243.5F/g at 1A/g, while regular graphite oxide (GO) was 43.5F/g and reduced graphene oxide (rGO) was 67.9F/g; 3) N-G exhibited the best supercapacitance performance and the superior electrochemical properties, which made it an ideal electrode material for supercapacitors
This paper introduced a process to prepare the carbon nanosphere (CNS)/NiCo2O4core-shell sub-microspheres. That is: 1) CNSs were firstly prepared via a simple hydrothermal method; 2) a layer of NiCo2O4precursor was coated on the CNS surface; 3) finally the composite was annealed at 350 °C for 2 hours in the air and the CNS/NiCo2O4core-shell sub-microspheres were obtained. This core-shell sub-microsphere was prepared with a simple, economical and environmental-friendly hydrothermal method and was suitable for large-scale production, which expects a promising electrode candidate for high performance energy storage applications. Electrochemical experiments revealed that the composite exhibited remarkable electrochemical performances with high capacitance and desirable cycle life at high rates, such as: 1) the maximum specific capacitance was up to 1420 F/g at 1 A/g; 2) about 98.5% of the capacitance retained after 3000 charge-discharge cycles; 3) the capacitance retention was about 72% as the current density increase from 1 A/g to 10 A/g.
In this work, a novel carbon nanotubes (CNTs)/NiCo2S4 composite for high performance supercapacitors was prepared via a simple chemical bath deposition combined with a post-anion exchange reaction. The morphologies and phase structures of the composites were characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectroscopy (Raman), X-ray photoelectron spectroscopy (XPS) and low-temperature sorption of nitrogen (BET). The electro-chemical tests revealed that the CNT/NiCo2S4 composite exhibited high electrochemical performance, because the CNTs were used as a conductive network for the NiCo2S4 hexagonal nanoplates. Compared with pure NiCo2S4 and the mechanically mixed CNTs/NiCo2S4 composite, the CNTs/NiCo2S4 composite electrode material exhibited excellent supercapacitive performance, such as a high specific capacitance up to 1537 F/g (discharge current density of 1 A/g) and an outstanding rate capability of 78.1% retention as the discharge current density increased to 100 A/g. It is therefore expected to be a promising alternative material in the area of energy storage.