Addressing the critical seismic vulnerabilities of reinforced concrete (RC) beam-column joints remains an imperative research priority in earthquake engineering. This study presents an experimental and analytical investigation into the seismic performance enhancement of non-ductile RC frames using an innovative all-steel Tube-in-Tube Buckling-Restrained Brace (TnT BRB) system. Shake table tests were performed on one-third scale RC frame specimens, including a baseline structure representing conventional substandard design and a counterpart retrofitted with the proposed TnT BRBs. Experimental results revealed that the unretrofitted specimen experienced pronounced brittle shear failures, excessive lateral deformations, and significant degradation of beam-column joints under cyclic seismic loading. In contrast, the TnT BRB-retrofitted specimen exhibited substantially improved seismic behavior, characterized by enhanced energy dissipation, controlled inter-story drifts, and preserved joint integrity. Advanced fiber-based finite element modeling complemented the experimental efforts, accurately capturing critical nonlinear phenomena such as hysteretic energy dissipation, stiffness degradation, and localized damage evolution within the structural components. Despite inherent modeling limitations regarding bond-slip effects and micro-level cracking, strong correlation between numerical and experimental results affirmed the efficacy of the TnT BRB retrofit solution. This integrated experimental-analytical approach offers a robust, cost-effective pathway for upgrading seismically deficient RC structures in earthquake-prone regions.

This study investigates the seismic performance of substandard reinforced concrete (RC) frames, particularly emphasizing the behavior of beam–column joints through comprehensive shake table testing. Historical evidence indicates that RC structures erected prior to the 1970s frequently exhibit critical deficiencies in shear reinforcement, significantly undermining their seismic resilience. The primary objective of this research is to experimentally quantify the shear capacity, deformability, and failure mechanisms of beam–column joints within substandard RC frames. Shake table experiments were conducted on a meticulously scaled (one-third scale), single-story, single-bay RC frame, representative of construction practices typical of 1980s Türkiye. The input seismic loading was derived and scaled from the recorded ground motions of the 2023 Kahramanmaraş earthquake to ensure realistic seismic demand conditions. Experimental outcomes revealed a maximum lateral displacement of 53.1 mm, corresponding to a story drift ratio of approximately 0.055 radians and a computed damage index of 0.758, indicative of near-collapse performance levels. Notable damage observations included extensive shear cracking and concrete spalling at beam–column interfaces, accompanied by pronounced pinching effects during cyclic loading. The findings emphasize an urgent need for targeted seismic retrofit solutions, specifically addressing shear vulnerabilities in beam–column joints. Furthermore, the results carry substantial implications for revising current seismic design codes and enhancing the earthquake resilience of existing RC infrastructure in seismic-prone regions.

Increasing energy demand urge the developing countries to consider different types of energy sources. Owing the fact that the energy production capacity of renewable energy sources is lower than a nuclear power plant, developed countries like US, France, Japan, Russia and China lead to construct nuclear power plants. These countries compensate 80% of their energy need from nuclear power plants. Further, they periodically conduct tests in order to assess the safety of the existing nuclear power plants by applying impact type loads to the structures. In this study, a sample third-generation nuclear reactor building has been selected to assess its seismic behavior and to observe the crack propagations of the prestressed outer containment. First, a 3D model has been set up using ABAQUS finite element program. Afterwards, modal analysis is conducted to determine the mode shapes. Nonlinear dynamic time history analyses are then followed using an artificial strong ground motion which is compatible with the mean design spectrum of the previously selected ground motions that are scaled to Eurocode 8 Soil type B design spectrum. Results of the conducted nonlinear dynamic analyses are considered in terms of stress distributions and crack propagations.

The process of seismic retrofitting for inadequate RC frames is vital for enhancing structural integrity in areas susceptible to earthquakes. This research investigates a novel tube-in-tube (TnT) buckling restrained brace (BRB) system aimed at improving the seismic performance of these substandard RC frames. By targeting significant weaknesses inherent in older RC constructions, the TnT BRB introduces a lightweight, all-steel configuration that eliminates the need for traditional mortar or concrete infill materials. Experimental shake table testing on two one-third scaled RC frame models was conducted to compare the seismic performance of an unretrofitted control frame and a frame retrofitted with the TnT BRB system. Results indicate significant enhancements in lateral strength, ductility, and energy dissipation capacity in the retrofitted frame, demonstrating stable and symmetrical hysteresis loops and reduced stiffness degradation compared to conventional X-braced systems. Analytical modeling corroborated these experimental findings, confirming the TnT BRB’s superior capability in absorbing seismic energy and preventing premature structural failures. This investigation emphasizes both the practical and financial benefits of integrating the TnT BRB into seismic retrofitting strategies while recommending further research to optimize the system, specifically addressing issues related to local denting, frictional wear, and alignment to bolster its effectiveness in practical applications.

The purpose of this paper is to discuss the response of the channel having semi-circular cross-section and the constant thickness in the case of SH waves. The dynamic interaction of soil and the channel that takes place during the passage of seismic waves through the soil has been of much interest to engineers. It has a bearing on the stresses in the channel and the changes in the time history of incident ground motion. It is assume that the channel is flexible, stiff and rigid, and soil is only elastic. The results are calculated from flexible case to stiff one for comparison. They are also determined for rigid case. If the channel is stiff enough, it might be assumed as rigid. An analytical solution is derived using wave-expansion method in polar coordinates for elastic channel. For the solutions of rigid channel, the equation of motion(Newton Second Law) is derived. This solution method takes into account dynamic interactions between soil and the structure. The results are derived depending on the incident wave angles and dimensionless wave numbers. Absolute responses of the channel are illustrated with respect to dimensionless frequencies and compared.