Large scale underground mining of coal resources in China using longwall mining has resulted in ecological and environment problems, including surface subsidence that is considered serious due to competing interests of prime agricultural lands, food security, and regional economic development. The subsided lands must be rehabilitated soon after mining to be agriculturally productive to minimize loss of farmland. Similarly, precious water resources must also be managed during and after mining to protect this natural resource. Toward these goals, the concept of “Concurrent mining and subsidence reclamation (CMR)” was proposed by Professor Hu of the China University of Mining and Technology, Beijing (CUMTB). Over the last two decades CMR concepts have evolved and successfully applied in the field in different parts of China. This innovative technology has increased available farmland during the mining process, and provided better land protection and food security in mining areas even with high groundwater table. The technology has been used in 5 of the 14 large coal bases in China. This paper describes the technology concepts, design and guiding principles for planning with two case studies from different regions to enhance its application both in China and in other countries.
As more easily mined deposits are depleted, the reserves are becoming more limited and less favorable. Deposits of coal or trona that are being longwall mined are deep and are getting deeper. Coal bursts and bumps frequently occur within development entries in longwall mining of deep mines due to high stresses. This paper presents a novel patented longwall mining layout “Longwall Mining with Split-level Gate roads (LMSG)” that has the potential to mitigate several problems related to deep mining (Patent No. ZL98100544.6). LMSG locates gate roads on either end of a longwall panel at different vertical heights within a coal seam or in a geologically split seam, so that the two adjacent panels can be partially offset horizontally. It is novel in that it incorporates unit operations of different mining methods into the system. By employing multiple slice longwall mining method locally at the face ends, and adjacent panels overlapping end to end, pillar-less longwall mining can be achieved to mine deep deposits. A conventional rectangular gate road pillar is therefore transformed into a small triangular pillar and the gate road of the subsequent panel can be located along or under the gob of the previously mined panel where the stresses are lower. Several mines in China and Russia are currently using the technology with reduced incidence of ground control problems. Through theoretical analysis, and physical and numerical modeling approaches, it is demonstrated that LMSG significantly improves stress environment for development entries, with associated reduction in coal bursts and ground control problems.
10 March 2023 in International Journal of Coal Science & Technology
This paper provides an overview of planning requirements, including regulatory, and implementation approaches for achieving ecologically sound reclamation and restoration of mines upon closure in the USA. Mine closure includes mined-out areas, decommissioning of plants and structures, and appropriate monitoring of post-mining land, water, and air resources. Although the discussion provides general guidelines, each mine closure site presents unique challenges. The overall chemical composition of coal and associated strata with mineable coal seams, structural characteristics of the deposit, weather patterns, environmental conditions, processing and scale of mining of the deposit, and public and private infrastructure must be considered. Future land use and water resource requirements are also important considerations. The planning and closure activities must ensure that the resultant site has the appropriate post-mining land and water resources use, and the site does not pose any future environmental and health and safety risks. These requirements suggest that closure activities should be integrated with the mining activity planning process from the start. This paper discusses mine closure issues and describes several practices for a surface coal mine in the Western USA.
1 April 2018 in Journal of Rock Mechanics and Geotechnical Engineering
Both room-and-pillar and longwall mining systems develop underground excavations whose stability must be ensured over their entire service life. Even though rock bolts have been extensively used as a support element in US coal mines for about 40 years, limited research has been conducted in quantifying its composite reinforcement effects. Recently, the authors suggested an approach to quantify the reinforcement effect of roof supports over a designated area based on critical failure strains in tension, compression and shear. This paper validates the critical strain technique (CST) using a case study and justifies the magnitude of selected critical strain by corroborating with the US roof fall statistics. Intersections are vulnerable to failure due to the larger exposed roof span and associated stress concentrations. Through numerical application of the CST to a case study, it was demonstrated that modifying the opening orientation and installing reinforcement at critical locations can help to improve the overall stability of intersections.
This study demonstrates a low-cost, high-efficiency filter press technology for dewatering minus 150 µm column flotation clean coal products from two coal mines. Pilot-scale in-plant demonstration of this technology at these two locations provided stable, trouble-free operation while achieving an excellent dewatering performance at a high throughput. At one location, filter cakes with residual total moisture contents in the 20–22% range were achieved. At the other location 25–27% residual total moisture contents were achieved. At the second location, lower cake moisture content in the range of 21–25% was achieved with the use of appropriate dewatering aids. For difficult to dewater coals with higher clay contents, the innovative use of hot water during the filtration process was found to reduce cake moisture content by two to three percentage points over the baseline conditions. Engineering economic evaluations indicated that a fine coal product can be produced using column flotation and the filter press at a cost of $5.95/t (dry basis) for one mine. With appropriate blending strategies, annual profitability can be shown to increase by $0.9 million ($US) for this 1.8 Mt/year mine. For the second 2.4 Mt/year mine, annual profitability was projected to increase by $2.5 million ($US).
Coal accounts for over half of India’s energy needs currently. However, it has resulted in significant environmental impacts such as altering land cover and land surface temperatures. This study quantifies the land surface temperature (LST) of Dhanbad City (India)—home to India’s largest coal reserves. It uses the Landsat 8 image data to evaluate urban and rural temperature variations across different land use–land cover (LULC) classes. Using a Geographically Weighted Regression Model (GWR), we examined the spatial heterogeneity of the LST using key environmental indices, such as the Normalized Difference Vegetation Index (NDVI), Modified Normalized Difference Water Index (MNDWI), Normalized Difference Moisture Index (NDMI), and Normalized Difference Barren Index (NDBI). The seasonal LST variations revealed significant urban–rural area temperature disparities, with rural regions exhibiting stronger correlations with the key indices above. The GWR model accounted for 78.31% of the spatial variability in LST, with unexplained heterogeneity in urban areas linked to anomalies identified in the coal mining area fire map. These findings underscore the necessity of targeted mitigation strategies to reduce high LST values in coal fire-affected regions, with localized spatial measures in mining areas.