This study explores integrating AlCoCrFeNiSi high-entropy alloy (HEA) particles into the Al5083 aluminum alloy matrix via Friction Stir Processing (FSP) to enhance mechanical characteristics. Microstructural analysis reveals a homogeneous distribution and size reduction of HEA particles, contributing to improved structural strength. X-ray diffraction (XRD) examination confirms the formation of solid solution phases in the HEA particles, validating their role in enhancing material properties. Through the utilization of Design of Experiments (DOE) and Response Surface Methodology (RSM), FSP parameters are systematically optimized, enabling precise predictions of mechanical behavior. Multi-response optimization identifies the optimal combination of FSP parameters, resulting in significant enhancements in Ultimate Tensile Strength (UTS) and Hardness, reaching 314 MPa, 42% elongation, and 75 HV, respectively. Scanning Electron Microscopy (SEM) analysis of tensile test specimens elucidates the impact of varied FSP parameters on microstructural features, emphasizing the importance of optimal mixing for improving interfacial bonding and mechanical properties. This study underscores the effectiveness of integrating HEA particles and optimizing FSP parameters to elevate the mechanical properties of Al5083 aluminum alloy, paving the way for tailored composite materials with enhanced performance for specific applications.
This study aimed to enhance the thermal performance of solar thermal collectors using silver nanoparticle-enhanced nanofluids. Silver nanoparticles, known for their high thermal conductivity, were synthesized via chemical reduction, stabilized with polyvinylpyrrolidone, and dispersed in base fluids like deionized water and ethylene glycol. Various nanoparticle sizes (20 nm to 50 nm) and concentrations (0.2 wt% to 0.8 wt%) were tested to optimize thermal conductivity while maintaining stability. Thermal properties were measured using the transient hot-wire method for conductivity, rotational rheometer for viscosity, and differential scanning calorimetry for specific heat capacity. Stability was monitored via UV-Vis spectrophotometry. Results indicated that smaller nanoparticles (20 nm) at lower concentrations (0.2 wt%) yielded the highest thermal conductivity of 0.73 W/mK, due to their high surface area-to-volume ratio. Viscosity increased with nanoparticle size and concentration, peaking at 0.0012 Pa.s for 50 nm nanoparticles at 0.8 wt%. Specific heat capacity remained relatively stable, slightly increasing with larger nanoparticles. Conclusions reveal that optimizing nanoparticle size and concentration is crucial for balancing enhanced thermal conductivity and manageable viscosity. These findings underscore the potential of silver nanoparticle-enhanced nanofluids in improving the efficiency of solar thermal systems, offering valuable insights for future research in sustainable energy technologies.