Liquid loading in horizontal/inclined gas wells challenges unconventional reservoir development globally. Accurate gas-water velocity and holdup monitoring is crucial for dynamic evaluation. This study simulates flow using a 10-m-long, 120-mm-ID inclined pipe (70°) at Southwest Petroleum University. Air ($\rho_{g}=1.21 \mathrm{~kg} / \mathrm{m}^{3}, \mu_{g}=0.018 \mathrm{mPa} \cdot \mathrm{s}$ ) and water ($\rho_{w}=0.997 \times 10^{3} \mathrm{~kg} / \mathrm{m}^{3}, \mu_{w}=1.002 \mathrm{mPa} \cdot \mathrm{s}$ ) served as media, with total flow rates of 50-500 m3/d and water content of 0%-100%. Capacitance Array Tool (CAT) and Spinner Array Tool (SAT) monitored holdup and velocity under stable conditions, while cameras recorded phase distribution. Flow regimes were primarily slug flow and elongated bubble (EB) flow. Significant probe response variations indicated uneven phase distribution. A torque model for the two-phase flow of gas and water was established, and the slip ratio was introduced to calculate the total flow rate of gas and water in the wellbore on the basis of the response of the array spinners. Validation against 54 experimental datasets showed superior performance over traditional momentum models. Mean relative error (MRE): 11% versus 20%; root mean square error (RMSE): 1.36 versus 2.86; and coefficient of determination ($R^{2}$ ): 0.97 versus 0.90. The model demonstrates effective application for intermittent flows in deviated wells, enabling high-precision production logging interpretation in unconventional gas reservoirs.
Multi-arm caliper logging tools provide a high-precision technology for monitoring tubing and casing integrity. However, due to the wellbore structure of horizontal wells and the self-weight of the instrument, the multi-arm caliper logging data of horizontal wells typically exhibit obvious eccentricity, resulting in a high misjudgment probability in the quantitative evaluation of oil and casing pipe damage. In this manuscript, simulation experiments were conducted using the 5.5-inch casing under laboratory conditions. The experiments clarified the response characteristics of forty-arm caliper logging tools in centered and eccentric states within intact and damaged casing. An equivalent model combining the instrument and the horizontal pipe structure was established, and a new method for correcting instrument eccentricity based on the forty-arm caliper logging data in horizontal wells was developed through theoretical analysis. The proposed model effectively overcomes the limitations of existing correction methods under casing damage conditions, reducing the relative error by up to 0.53% and 1.16% in intact and damaged well sections, respectively, compared to the ellipse-fitting algorithm. This effectively improves the correction coincidence rate for eccentricity influence of multi-arm caliper logging tools under various conditions in horizontal well. Applying this established method to the processing and interpretation of forty-arm caliper logging data in horizontal wells provides robust technical support for the high-precision quantitative evaluation, damage location identification, and repair of horizontal well casing.
Multi-arm caliper logging tools provide a high-precision technology for monitoring tubing and casing integrity. However, due to the wellbore structure of horizontal wells and the self-weight of the instrument, the multi-arm caliper logging data of horizontal wells typically exhibit obvious eccentricity, resulting in a high misjudgment probability in the quantitative evaluation of oil and casing pipe damage. In this manuscript, simulation experiments were conducted using the 5.5-inch casing under laboratory conditions. The experiments clarified the response characteristics of forty-arm caliper logging tools in centered and eccentric states within intact and damaged casing. An equivalent model combining the instrument and the horizontal pipe structure was established, and a new method for correcting instrument eccentricity based on the forty-arm caliper logging data in horizontal wells was developed through theoretical analysis. This model efficiently overcomes the limitation of existing eccentricity correction models in weakening damage detection under casing damage conditions. When compared with experimental data, the relative error between intact well section after eccentricity correction and centered measurement ranged from -4.93% to -0.72%, representing a reduction of 0.03% to 0.53% compared to the ellipse-fitting algorithm. The relative error between the response value of the damaged well section after eccentricity correction and centered measurement ranged from -5.02% to -0.45%, representing a reduction of 0.92% to 1.16% compared to ellipse-fitting algorithm. This effectively improves the correction coincidence rate for eccentricity influence of multi-arm caliper logging tools under various conditions in horizontal well. Applying this established method to the processing and interpretation of forty-arm caliper logging data in horizontal wells provides powerful technical support for the high-precision quantitative evaluation, damage location identification, and repair of horizontal well casing.