The importance of photovoltaic-thermal (PV / T) collector systems in renewable energy technologies is increasing for combined hybrid electrical heat applications. The efficiency of photovoltaic (PV) systems varies between 5-20%. On average, 15% of the solar radiation coming to the PV panel surface is converted to electrical energy and the remainder is lost. In this study, a PV/T collector was designed using two different fluids simultaneously and its efficiency was calculated numerically. PV/T collector systems are specifically designed for agricultural production and their advantages are discussed. In this study, numerical calculations of PV/T collector with a different design have been made. The results were compared with reference to another experimental study. Two different working fluids (air and water) were used in the calculations. The system where air is used as working fluid is called Mode 1 and the system where water is used is called Mode 2. It is aimed to achieve high heat transfer by using water pipes, air ducts and fins placed under PV panels. In this way, it is aimed to produce a more stable hot air and water. In addition, in order to investigate the effect of flow on the yield, different flow rates were calculated. As a result of the theoretical analyses and calculations made in consideration of literature, the total efficiencies of air flow mode (Mode 1) were calculated as 43.2%, 46,2% and 48.7% at 0.0067 kg/s, 0.0072 kg/s and 0.0077 kg/s mass flow rates, respectively. For water flow mode (Mode 2), these values computed as 52.81%, 53.83% and 55.04% at 0.023 kg/s, 0.036 kg/s and 0.054 kg/s mass flow rates, respectively. It was found that PV / T collector efficiency increased with increasing end flow. Designed collector system is preferable in terms of effective use of energy and it can be easily applicable in processes such as hot air-water preparation, drying and greenhouse heating.
In 21th century demand for energy is rapidly increasing as the population is increased. To provide desirable living conditions and satisfy the food needs of overpopulated humanity getting harder and harder due to the limited energy and nutrient resources. Nutrient sources pass through many stages such as heating, cooling, drying and freezing which includes thermal and electrical energy needs before being presented to the consumer in the food industry. In the current situation, these two main energy requirements are largely met by fossil fuels which are not efficient, non-sustainable and not user friendly in terms of resource management. In this context, the possibilities of usage Photovoltaic-Thermal (PV/T) solar energy systems which will be able to eliminate these disadvantages, use solar energy as a source and can meet the thermal and electrical requirements of the facility continuously has been investigated and, a system was designed which can meet the energy needs according to different scenarios for different processes. It is aimed to produce food in low carbon-emission facilities by meeting both electrical and thermal energy from the solar energy which is a renewable and clean energy source.
Bu çalışmada, yüksek nem içeriğine sahip ham balın ısı pompası destekli hijyenik bir kurutucuda kurutulması teorik olarak incelenmiş, Türk Gıda Kodeksi Bal Tebliği’ne göre ideal üretim ve depolanma koşullarına sahip balın yüksek enerji-kurutma verimi ve düşük enerji tüketimi ile üretilmesi amaçlanmıştır. Ham balın %40 nem içeriğinden %17 (yaş bazda) nem içeriğine kadar kurutulması, enerji tüketimi ve kurutma süresi açısından incelenmiş; 40 °C ve 1 m/s kurutma havası şartlarında 1 kilogram balın içerisindeki fazla nemin uzaklaştırılması için gereken süre 0.29 saat olarak hesaplanmıştır. Enerji-kurutma verimliliği, özgül enerji tüketimi, nem alma hızı ve tüm sistem için ısı pompasının etkinlik katsayısı sırasıyla %27.11, %30.01, 2.64 kWh/kg, 0.96 kg/s ve 2.65 olarak hesaplanmıştır. Analizler sonucunda elde edilen veriler ile sunulan tasarımın enerji tüketimi ve kuruma süresi açısından uygunluğu saptanmış olup, sistem kaliteli bal eldesi için endüstride kullanılabilecek bir sistem olarak önerilebilir.
A significant portion of energy consumption in buildings is allocated to heating, with substantial losses resulting from inadequate insulation, poor sealing, and thermal bridging. While proper insulation plays a crucial role in mitigating these losses, determining its optimal thickness is essential to reduce energy consumption and increase energy efficiency. This study employs life cycle cost analysis and average heating degree day values to calculate the optimum insulation thickness for 81 provinces in Türkiye. The findings highlight the absence of a one-fits-all insulation solution, emphasizing the need for customized approaches tailored to specific conditions that consider specific factors, such as environmental conditions, heating sources, costs, economic parameters and the materials used. Proper insulation application is projected to reduce carbon emissions by 90% and lower annual heating costs by approximately 65%. These energy efficiency improvements are particularly significant for both households and businesses, enhancing profitability and competitiveness. Collaborative efforts to promote proper insulation solutions are anticipated to reallocate financial resources toward innovation and contribute to long-term business sustainability. This study provides an important framework for guiding the adoption of proper insulation practices in building design and construction.
Food processing studies are important for both efficient use of energy and to obtain quality products. Yoghurt is a dairy product which consumes widely. Yoghurt producing facilities consumes high energy and run at low efficiency due to their traditional production methods. In order to produce quality yoghurt, pasteurized milk should be kept at 42-45 oC for 3-5 hours depending on the yeast type, this process called as incubation. After the incubation process, produced yoghurt must be cooled down to 20 oC in two hours depending on the package size of yoghurt. In conventional yoghurt production facilities, required heating and cooling are applied independently and this approach causes high energy consumptions, waste heat and the inefficient use of energy. In this study, a combined system consisting of a heat pump and a heat storage unit which is capable of the simultaneously heating and/or cooling application independently of each other is designed to ensure higher energy performance and efficiency. Thus, the required energy for heat transfer from the evaporator and cooling after the incubation process was ensured from the stored ice and, independently of the weight of the product, 64/68 units of energy (depending of refrigerant) were gained for each 100 units of required heating energy.The coefficient of performance (COP) of the system using R410a and R134a for heating, cooling and dual operation modes were calculated as 2.83, 1.83, 4.66 and 3.16, 2.16, 5.31, respectively. Energy costs for heat pump and conventional natural gas-fuel-oil boilers were compared. High energy efficiency and low energy consumption have been provided with the presented design, and suggestions for use for production facilities are given.