Ground motion intensity measures (IMs) provide a link between the probabilistic seismic hazard analysis and probabilistic structural response analysis. IMs that are well correlated with the structural response allow an estimation of the seismic response of the structure with low uncertainty (i.e., high efficiency), reducing the computational effort involved in the structural response analysis. In this paper, the efficiency of 10 different IMs for estimating the seismic response of wood-frame single-family houses is evaluated and compared. Six nonlinear models of one- and two-story houses with varying fundamental periods are analyzed. Based on the results, the 5%-damped average spectral pseudoacceleration at a period of 0.16 s is the recommended IM for estimating peak interstory drifts and peak roof accelerations in wood-frame houses. On the other hand, for collapse assessment of wood-frame houses the filtered incremental displacement with one pulse segment, a 4 Hz cut-off frequency, and a period of 0.5 s, is the most efficient IM, followed by peak ground velocity which is also a very efficient alternative. Finally, an expression for the spatial correlation of 5%-damped average spectral pseudoaccelerations is developed for use in regional seismic risk assessments.
11 April 2019 in Earthquake Engineering & Structural Dynamics
This paper presents a ground motion prediction model (GMPM) for estimating medians and standard deviations of the random horizontal component of the peak inelastic displacement of 5% damped single‐degree‐of‐freedom (SDOF) systems, with bilinear hysteretic behavior and 3% postelastic stiffness ratio, directly as a function of the earthquake magnitude and the distance to the source. The equations were developed using a mixed effects model, with 1,662 recorded ground motions from 63 seismic events. In the proposed model, the median is computed as a function of the vibration period and the normalized strength of the system, as well as the event magnitude and the Joyner‐Boore distance to the source. The standard deviation of the model is computed as a function of the vibration period and the normalized strength of the system. The proposed model has the advantage of not requiring an auxiliary elastic GMPM to predict the median and dispersion of peak inelastic displacement.