Active magnetic bearings (AMBs) can actively control the on-board rotor to reduce excessive vibration caused by base motion and improve the system's ability to withstand base excitation. Current active controllers for base motions require additional sensors or complex robust designs, making it difficult to balance reliability and applicability. In this article, a disturbance observer (DOB) approach is developed, numerically and experimentally, to observe and suppress disturbance caused by base motions, which can achieve vibration control without adding additional sensors or replacing the commonly used proportional-integral-derivative controller. Specifically, an AMB-rotor system model considering base motions is established based on general equation of motion. The effect of base motions on the system is considered as disturbance, including additional external forces, stiffness forces, and gyroscopic forces. The working principle, robust stability analysis, and design process of the DOB are presented. Simulation and experiments are conducted on a lab-scale AMB-rotor test rig. The DOB exhibits satisfactory behaviors under harmonic and shock excitations. The impact of the observation bandwidth of the DOB on vibration suppression is also analyzed.
1 January 2016 in Mechanical Systems and Signal Processing
Active magnetic bearing (AMB) has been increasingly applied in high-speed rotating machinery applications because of the inherent merit of providing contactless magnetic force to levitate rotor. Generally, rotor AMB systems are applied in the static base situation whereas the recent work has also demonstrated their applicability in moving base conditions. Compared with traditional static base condition, the base motion condition is more complicated for rotor AMB system. For a better controller design and dynamic analysis, the dynamic modeling of AMB system operating in base motion condition is critical. However, the dynamics modeling of AMB system working in base motion condition has been rarely reported. Particularly, the rotational base motions are always neglected. Herein, in this work, based on a double-gimbal system model, we propose and develop a dynamic modeling method for AMB system considering both translational and rotational base motions. The derivation reveals that the translational base motion is equivalent to the external force applied to the rotor and the rotational base motion is equivalent to the external torque applied to the rotor. Furthermore, making use of the proposed dynamic model, we also analyze the dynamics of rotor displacement in the impact base motion condition from the aspects of excitation amplitude, pulse width and supporting parameters.
1 January 2019 in Mathematical Problems in Engineering
Aiming at demonstrating the feasibility and capability of applying magnetorheological (MR) dampers to the vehicle vibration control, the hyperbolic tangent model is established to characterize the performance of a shear‐valve mode MR damper that was developed for a vehicle suspension system in this study. An experimentally derived differential evolution (DE) algorithm is used to find the optimal parameters of the model. To demonstrate the effectiveness of the MR damper for semiactive suspension systems, a model was constructed of a quarter‐car suspension system with the damper. A fuzzy control algorithm with a correction factor was adopted to control the output force of the damper and obtain better overall control of the performance of the suspension system. Simulation results indicate that the improved fuzzy control algorithm provides a better ride comfort than normal fuzzy control and passive control. Furthermore, the semiactive suspension system displayed effectively vibration suppression thanks to the MR damper combined with corresponding control algorithms.
26 February 2019 in Journal of Mechanical Science and Technology