Food 3D printing technology holds significant potential for personalized nutrition and the customization of 3D structures with specific shapes and textures. This emerging technology is driving significant innovations in food processing and manufacturing. This article reviews the current research and development opportunities in food 3D printing, with a focus on various types of 3D food printing technologies. We offer novel insights into the behavioral characteristics of various 3D printing techniques during the printing process, while also highlighting that the successful development of 3D-printed food products relies on four critical factors: (1) adaptability, (2) printability, (3) food safety, and (4) consumer acceptance. Special emphasis is placed on the application and potential challenges of 3D printing technology, aiming to foster technological breakthroughs and industrial applications, ultimately offering consumers safer, smarter, and more personalized food choices.
Low-temperature deposition manufacturing has attracted much attention as a novel printing method, bringing new opportunities and directions for the development of biological 3D printing and complex-shaped food printing. In this article, we investigated the rheological and printing properties of gelatin solution and conducted numerical simulation and experimental research on the low-temperature extrusion process of gelatin solution. The velocity, local shear rate, viscosity, and pressure distribution of the material in the extrusion process were calculated using Comsol software. The effects of the initial temperature, inlet velocity, and print head diameter of the material on the flow field distribution and printing quality were explored. The results show that: (1) the fluidity and mechanical properties of gelatin solution vary with its concentration; (2) the initial temperature of material, inlet velocity, and print head diameter all have varying degrees of influence on the distribution of the flow field; (3) the concentration change of the material mainly affects the pressure distribution in the flow channel; (4) the greater the inlet velocity, the greater the velocity and shear rate in the flow field and the higher the temperature of the material in the outlet section; and (5) the higher the initial temperature of the gel, the lower the viscosity in the flow field. This article is of great reference value for the low-temperature 3D printing of colloidal materials that are difficult to form at room temperature.
As the continuous expansion of robot grinding objects, the traditional manual teaching and offline programming methods can no longer meet people’s requirements for grinding trajectories. With the help of a 3D scanner, model data can be acquired quickly and accurately, which facilitates trajectory planning and effective grinding for workpieces. In this paper, a point cloud hole repair method is proposed based on B-spline surface. It integrates point cloud segmentation, feature point removal, smoothing and hole repair, aiming to solve the hole problem in steel helmet scanning. In addition, to generate a uniform grinding trajectory, a planning method is proposed based on an improved B-spline curve. This method combines curve homogenization with equidistant offset and uses k-nearest neighbor search. Iteratively identify and eliminate unreliable point data to determine the best point of contact. The effectiveness of the two methods is verified by trajectory planning on three types of steel helmets.
Low-temperature food printing technology is used in many fields, such as personalized nutrition, cooking art, food design and medical nutrition. By precisely controlling the deposition temperature of the ink, a food with a finer and more controllable structure can be produced. This paper investigates the influence of nozzle temperature on printing performance via a numerical simulation and experimental research. The results indicate that the ink gradually changed from a granular state to a fLow-characteristic deposition structure when the nozzle temperature increased from 19 °C to 27 °C. When the nozzle temperature exceeded 21 °C, the ink demonstrated excellent extrusion behavior and tended to flow. The widths of the rectangular frame deposition showed no obvious changes and were 4.07 mm, 4.05 mm and 4.20 mm, respectively. The extrusion behavior of the ink showed a structural mutation in the temperature range of 19–21 °C. Its line width changed from 3.15 mm to 3.73 mm, and its deposition structure changed from a grainy shape to a normal shape. Under the influence of different environmental control capabilities, bulk structure deposition demonstrates an ideal printing performance at 21, 23 and 25 °C, and the latter temperature is more suitable in the case of large external interference. The ink flowed violently when the nozzle temperature reached 27 °C, at which point the deposit structure flowed and deformed seriously. On the other hand, evaporation losses had a strong effect on Low-viscosity ink. To reach the full potential of this promising technology, it is necessary to determine the effect of nozzle temperature on printing performance. This article provides a method for developing and applying Low-viscosity, Low-temperature food printing.