Organic polymer based electrical memory devices have attracted significant scientific interest for flexible electronics. However, molecular design principles of polymers with specified memory characteristics on flexible substrates remain challenges. Herein we developed new triphenylamine–pyrene containing donor–acceptor polyimides (PIs) on flexible poly(ethylene naphthalate) (PEN)/Al/PIs/Al cross-point devices, which showed the memory characteristics changing from volatile to nonvolatile via the relative copolymer ratio. The PIs were prepared from the diamines 4,4′-diamino-4′′-methyltriphenylamine (AMTPA) or N,N-bis(4-aminophenyl)aminopyrene (APAP) and the dianhydride 4,4′-(hexafluoroisopropylidene)diphthalic anhydride (6FDA), with relative AMTPA/APAP molar compositions of 100/0, 95/5, 90/10 and 0/100. As the APAP content increased, the memory device characteristics changed from volatile to nonvolatile behavior of flash and write once read many (WORM), since the pyrene moiety could stabilize the radical cation of the APAP moieties. The threshold voltage, ON/OFF ratio, and retention ability were within −3 V, more than 104, and 104 s, respectively. Additionally, the endurance and bending cyclic measurements confirmed that the flexible PI memory devices exhibited excellent reliability and mechanical stability. A possible switching mechanism based on the charge transfer interaction was proposed through molecular simulation and fitted with physical conduction models in OFF and ON states. The manipulation of the memory volatility through tailoring the molecular design and plastic electronic devices demonstrated promising applications of donor–acceptor PIs in integrated memory devices.
We explore the memory device characteristics of the all-conjugated diblock copolythiophenes, poly(3-hexylthiophene)-block-poly(3-phenoxymethylthiophene) (P3HT-b-P3PT), and their blends with PCBM. The field-effect transistors prepared from P3HT-b-P3PT showed a significant hysteresis between the forward and backward gate-bias scans in the transfer curve, indicating the occurrence of charge trapping. The charge trapping may have occurred within the amorphous P3PT domains dispersed in the block copolythiophene by preventing charge transport. P3HT525252-bbb-P3PT393939 and P3HT102102-bb-P3PT3737 exhibited dynamic random access memory (DRAM) behavior in the sandwich configuration of ITO/P3HT-b-P3PT/Al, whereas P3HT only showed semiconductor characteristics, suggesting the significant effect of the amorphous P3PT segments on the electrical switching behavior. By blending a small amount (5–10 wt%) of PCBM into P3HT-b-P3PT of different block ratios (P3HT525252-bbb-P3PT393939, P3HT102102-bb-P3PT3737, and P3HT8989-bb-P3PT2323), the memory devices showed a write-once-read-many times (WORM) behavior with the switching voltages of −2.6 to −3.3 V and high ON/OFF ratios (105 to 107). The mechanism associated with the memory characteristics was the charge transfer from the P3HT-b-P3PT donor to the PCBM acceptor, which stabilized the charge separated state and retained the high conductance state for a long time during the ON stage. These experimental results provide a new strategy of designing all-conjugated block copolymers for advanced memory device applications.
21 April 2011 in Journal of Polymer Science Part A: Polymer Chemistry