We demonstrate slow light via population oscillation in semiconductor quantum-well structures for the first time. A group velocity as low as 9600 m/s is inferred from the experimentally measured dispersive characteristics. The transparency window exhibits a bandwidth as large as 2 GHz.
Visible light communication (VLC) is an advanced, highly developed optical wireless communication (OWC) technology that can simultaneously provide lighting and high-speed wireless data transmission. A VLC system has several key advantages: ultra-high data rate, secure communication channels, and a lack of interference from electromagnetic (EM) waves, which enable a wide range of applications. Light-emitting diodes (LEDs) have been considered the optimal choice for VLC systems since they can provide excellent illumination performance. However, the quantum confinement Stark effect (QCSE), crystal orientation, carrier lifetime, and recombination factor will influence the modulation bandwidth, and the transmission performance is severely limited. To solve the insufficient modulation bandwidth, micro-LEDs (μ-LEDs) and laser diodes (LDs) are considered as new ideal light sources. Additionally, the development of modulation technology has dramatically increased the transmission capacity of the system. The performance of the VLC system is briefly discussed in this review article, as well as some of its prospective applications in the realms of the industrial Internet of Things (IoT), vehicle communications, and underwater wireless network applications.
We propose and realize a substrate-free metal-cavity surface-emitting microlaser with both top and sidewall metal and a bottom distributed Bragg reflector as the cavity structure. The transfer-matrix method is used to design the laser structure based on the round-trip resonance condition inside the cavity. The laser is in diameter and in height, and operates at room temperature with continuous-wave mode. Flip-bonding the device to a silicon substrate with a conductive metal provides efficient heat removal. A high characteristic temperature about 425 K is observed from 10 to .
14 July 2009 in IEEE Journal of Quantum Electronics
We develop a fundamental formulation of plasmonic nanolasers from Fermi's Golden rule, taking into account the inhomogeneity and dispersion of the cavity media. We demonstrate that the electromagnetic energy confinement factor and the corresponding effective volume lead to a more consistent formulation for the rate equations of nanolasers. We also use a Fabry-Perot nanolaser based on the plasmonic slab waveguide as an example and compare the energy confinement factor with other counterparts. In particular, we show that the power confinement factor is inappropriate for plasmonic cavity modes.
Semiconductor plasmonic lasers at submicron and nanometer scales exhibit many characteristics distinct from those of their conventional counterparts at micron scales. The differences originate from their small sizes and the presence of metal plasma surrounding the cavity. To design a laser of this type, features such as metal dispersion, optical energy confinement, and group velocity have to be taken into account properly. In this paper, we provide a comprehensive approach to the design and performance evaluation of plasmonic Fabry-Perot nanolasers. In particular, we show the proper procedure to obtain the key parameters, especially the quality factor and threshold gain, which are usually neglected in conventional semiconductor Fabry-Perot lasers but become important for nanolasers.