SUNDARAMALI G

Dr. SUNDARAMALI G

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2021 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
SENTHIL KUMARAN SELVARAJSENTHIL KUMARAN SELVARAJ
SENTHIL KUMARAN SELVARAJ
SGSUNDARAMALI G
SUNDARAMALI G
SDS. Jithin Dev
S. Jithin Dev
RSR. Srii Swathish
R. Srii Swathish
RKRahul Karthikeyan
Rahul Karthikeyan
VPVelmurugan Paramasivam
Velmurugan Paramasivam
In this review article, research papers related to recent developments in Ni‐superalloy technologies have been reviewed in order to provide an insight into recent achievements and the potential for further study, research, and development in this field. In this paper, studies on various aspects of Ni‐based superalloys are reviewed, such as production methods, which include widely used casting methods, as well as unconventional alternative procedures, novel techniques, or simulation and prediction of certain alloy casting properties. Reviewing was done by categorising the papers into 4 major categories: manufacturing of Ni‐based superalloys, effects of alloying elements, physical and mechanical properties of Ni‐based superalloys, and defects in Ni‐based superalloys. The process used to make Ni‐superalloy parts can have a huge impact on the production process efficiency, the final product’s quality and properties, and the defects formed in it. Investment casting is one of the most common methods for making Ni‐superalloy parts. Manufacturing covers studies on various casting methods used to make Ni‐based superalloy components, novel techniques and methods developed to improve casting procedures to produce better products, and alternative manufacturing methods like AM and HIP processing. Similar to production process, the role of alloying elements is also very important. Even minor changes in their compositions can cause significant changes in the final product. Simultaneously, these alloying elements appear to be more efficient in the development of new methods to control product quality, suppress defect formation, and improve material properties such as the creep and fatigue. As a result, the effects of various alloying elements used in castings of Ni‐based superalloys are thoroughly examined. A material’s properties are its most important components. They assist the industrialist in selecting or developing a material based on the needs of the application/use. With this in mind, many researchers have conducted extensive research on physical and mechanical properties, as well as how to improve them. Fatigue life, stress rupture, creep properties, impact ductility, strain response, stress relaxation behaviour, and so on are some of the most important physical and mechanical properties of Ni‐superalloys. This article thoroughly reviews various studies on these properties, how and by what factors they are affected, and how they can be improved. Another important factor to consider when making Ni‐superalloy castings is defect formation, which can affect the properties of the final product. Freckle defects, hot tears, porosities, and slivers are some of the major defects that occur in Ni‐superalloys during the casting process. This article also reviews in detail about these defects, how they form, and how they affect the final product. These defects were found to have a significant influence on a variety of properties, such as creep, fatigue behaviour, and fracture mechanism. Topics and areas such as reinforcement of Ni‐superalloys with the help of CNCs and 3D printing of Ni‐superalloys that can provide scope for potential future research are highlighted based on the above‐reviewed papers.

1 January 2023 in REVIEWS ON ADVANCED MATERIALS SCIENCE
Verified
Journal Article
Open access
PDF file
SGSUNDARAMALI G
SUNDARAMALI G
JAJeeva P. Aiyasamy
Jeeva P. Aiyasamy
KSKARTHI KEYAN S
KARTHI KEYAN S
TKThanjavur K. Kandavel
Thanjavur K. Kandavel
ABArulmurugan Balasubramanian
Arulmurugan Balasubramanian
EEElsayed Mohamed Tag Eldin
Elsayed Mohamed Tag Eldin
The aluminum (Al) alloy AA7075 is widely used in various industries due to its high strength-to-weight ratio, which is comparable and replaceable to steel in many applications. However, it has poor resistance to wear and corrosion compared to other Al alloys. The conventional pressure die coating with Cr and cadmium has led to premature failure while the load is applied. It is indeed to develop a novel coating method to improve the mechanical, wear, and corrosion properties of AA7075 Al alloy. In the present investigation, the binary and ternary metals such as zinc–nickel (Zn–Ni), zinc–cobalt (Zn–Co), and nickel–chromium–cobalt (Ni–Cr–Co) are electroplated on the substrate material (AA7075). In order to ensure optimal coating adhesion, the surface of the substrate material was pre-treated with laser surface treatment (LST). The mechanical and corrosion studies have been carried out on the uncoated and coated materials. It is observed from the findings that the ternary coating has higher wear resistance than the binary-coated material. The ternary coating has 64% higher resistance in the non-heat-treated status and 67% higher resistance in the heat-treated condition compared to the uncoated specimens. The tensile strength (MPa) of Ni–Cr–Co on AA7075 pressure die casting (PDC) is higher than the other deposits (582.24 of Ni–Cr–Co > 566.07 of Zn–Co > 560.05 of Zn–Ni > 553.64 of uncoated condition). The presence of a crystalline structure with the high alignment of Co and Ni atoms could significantly improve the corrosion resistance of Ni–Cr–Co coatings on AA 7075 PDC substrates when compared to binary coatings. The scanning electron microscopy (SEM) images, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy findings on the coated materials have been corroborated with the analyses on mechanical and corrosion properties. The XRD analysis of the Zn–Ni binary coating has reported that the diffraction peaks of γ-NiZn3 (831), γ -Ni2Zn11 (330), and 631 with 2θ values 38, 43, and 73° are confirming the presence of Zn–Ni binary deposit on AA7075 PDC substrate. The XRD pattern of Zn–Co-coated material has revealed that the presence of three strong peaks such as Zn (110), Co (111), and CoZn (211) and two feeble peaks such as ε-CoZn3 (220) and ε-CoZn3 (301) are clearly visible. The XRD pattern of Ni–Cr–Co ternary coating has exhibited that the Ni–Cr–Co ternary deposit is a solid solution with a body-centered cubic structure due to the formation peaks at lattice plane such as (110), (220), and (210) with a crystal lattice constant of 2.88 A°. The SEM image for both the binary- and ternary-coated materials has exhibited that the deposited surface has displayed many shallow pits due to hitting by progressive particles. The SEM image has illustrated the presence of Zn–Ni atoms with smaller globular structure. The surface morphology of binary Zn–Co coating on the PDC AA7075 substrate has unveiled the evenly distributed dot-like structure and submerged Co particles in the galaxy of Zn atoms. To understand the effectiveness of bonding by laser texturing, cross-section SEM has been carried out which furthermore revealed the effective adhesion of Ni–Cr–Co on AA7075 PDC; this could also be the reason for the enhancement of microhardness, wear, and corrosion resistance of the said coating.

17 April 2025 in Results in Engineering
Verified
Journal Article
Open access
AKAravind Kumar Kuppusamy
Aravind Kumar Kuppusamy
SGSUNDARAMALI G
SUNDARAMALI G

22 March 2023 in Environment, Development and Sustainability
Verified
Journal Article
Closed access
PDF file
MRMahadharsan Ravichandran
Mahadharsan Ravichandran
KVK. E. K. Vimal
K. E. K. Vimal
Vikas KumarVikas Kumar
Vikas Kumar
OKOnkar Kulkarni
Onkar Kulkarni
SGSUNDARAMALI G
SUNDARAMALI G
JKJayakrishna Kandasamy
Jayakrishna Kandasamy

25 August 2022 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
DSDev Jithin S.
Dev Jithin S.
SENTHIL KUMARAN SELVARAJSENTHIL KUMARAN SELVARAJ
SENTHIL KUMARAN SELVARAJ
KVK. E. Vijay Vishaal
K. E. Vijay Vishaal
SGSUNDARAMALI G
SUNDARAMALI G
In harsh working environments where there can be very high temperatures and heavy loads, like in the inside of the combustion chamber of a rocket, industrial gas turbines, space vehicles, and so on, a special class of material will be needed for making the required parts. This special class of materials is called superalloys. There are many types of superalloys based on the major alloying element. But, among these, Ni-superalloys stand out significantly due to their superior mechanical and physical characteristics. Thus, they are widely used in situations where the working conditions are unbearably harsh for ordinary materials. And, due to this, a lot of research have been done on Ni-superalloys for improving them and studying their properties. This extensive research work has led to the development of many generations of Ni-superalloys, with alloys getting better and better with each passing generation. Among all generations, the 5th and 6th generations of Ni-superalloys are the most recently developed ones. With the development of 5th and 6th gen alloys being very recent, there are not many studies conducted on them. With the current bloom in aerospace, energy, and thermonuclear research fields, the need for materials such as Ni-superalloys that can withstand absurdly harsh environments is increasing. That is one of the reasons why reviewing existing studies pertaining to recently developed new generation alloys is very important. It can help us in finding out the future possibilities for research so that we can develop new alloys or improve the existing ones. In this review paper, various aspects of these alloys such as fatigue properties, creep properties, oxidation resistance properties, corrosion resistance properties, element composition of these alloys and their impact on the above factors, use of various manufacturing methods, and the presence of additives have been extensively studied.

1 January 2022 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
KBKarthikeyan B
Karthikeyan B
SENTHIL KUMARAN SELVARAJSENTHIL KUMARAN SELVARAJ
SENTHIL KUMARAN SELVARAJ
GDG. Dhinakaran
G. Dhinakaran
SGSUNDARAMALI G
SUNDARAMALI G
NMNatarajan Muthuswamy
Natarajan Muthuswamy
VPVelmurugan Paramasivam
Velmurugan Paramasivam
This paper discusses the permeation characteristics of concrete made by increasing the fineness of the conventional mineral admixtures and using them as a partial substitute for cement. Silica fume and metakaolin ground to ultrafine state and ceramic powder obtained from grinding waste ceramic tiles were used as mineral admixtures. The mixes were designed for a compressive strength of 50 MPa and were prepared for both binary and ternary blended cases. Binary blended specimens were cast, partially replacing cement with unground silica fume, ground silica fume, unground metakaolin, and ground metakaolin separately in different replacement proportions. Ternary blended mixes were prepared using ceramic powder in 4%, 9%, and 14% and with silica fume in a constant level of 1% percentage. All the cast specimens were compared against the control concrete. A deeper comparative analysis was also made by comparing the performance of specimens made with unground mineral admixtures with that of ground mineral admixtures. Various parameters such as resistance against water absorption, percentage of voids, and sorptivity characteristics were studied. It was observed that increasing the fineness helps fill up the pores, thereby improving the resistance to permeation action.