Radiation-induced attenuation (RIA) at 1542 nm of fluorine-doped fibers under gamma radiation source has been investigated for different dose rates and temperatures. Both the temperature and dose rate dependencies are unusual. First, the fiber presents an enhanced low dose rate sensitivity that is favored by increasing temperature. Furthermore, in certain conditions, RIA increases with irradiation temperature, which is a very rare phenomenon. We have built a phenomenological model that shows that these behaviors can be explained considering that two color centers previously identified in the literature are responsible for RIA: inherent and strain-assisted self-trapped holes.

Gamma-ray-induced attenuation in Al-doped and Al/Tm-co-doped optical fibers is investigated in the visible and near-infrared domain up to 1 Gy. The behavior of radiation-induced attenuation (RIA) regarding dose and dose rate is discussed. Our results reveal high sensitivities for both types of fibers at low gamma ray doses and also reveal that Al/Tm fibers are very promising at original interrogation wavelengths for dosimetry applications.

Fiber optic sensors are increasingly used to measure dynamic strain fields caused by the propagation of mechanical waves. Their low intrusiveness when embedded within a structure makes them suitable for a wide range of applications. In this paper, the feasibility of integrating fiber Bragg gratings (FBGs) into castable materials for ultrasonic applications is investigated. We employed castable polyurethane resins, which are widely used in industry due to their reproducible and durable mechanical properties. Our study began with an analysis of fiber integration by examining the 1D strain profiles of two polyurethane resins during their polymerization and also the impact of their hardening on the central wavelength value of several FBGs spectra. Subsequently, we assessed the sensitivity of FBGs to ultrasonic waves generated at 100 kHz after resin polymerization. Specifically, we explored how the fiber coating influences the rate of energy transfer from the host material to the fiber core. Our findings demonstrate that the central wavelength shift in the FBG reflectivity spectra, caused by shrinkage during resin polymerization, can reach up to 10 nm. This shift must be considered when selecting FBG wavelengths to prevent the reflectivity spectra from falling outside the permissible range of the interrogation system. We measured exploitable ultrasonic waves propagating in the resin samples. Preliminary observations suggest the presence of early arrivals, which could potentially correspond to crosstalk effects between the FBGs even though they are centered at different wavelengths. Furthermore, we show that in dynamic strain fields caused by ultrasonic wave propagation, both acrylate and polyimide coatings transmit similar amounts of energy to the fiber core. These preliminary results highlight the potential of using FBGs as ultrasonic wave sensors embedded in castable materials such as polyurethane resins.

Gamma-induced RIA of aluminosilicate and Al/Tm co-doped optical fibers is investigated in the visible and near-infrared domain. The data reveal a promising interrogation wavelength for low dose, highly sensitive dosimetry with Al/Tm fibers.