The treatment of used vegetable oils (UVOs) with clays represents a pivotal step in their industrial recycling process as well as one of the most challenging topics for researchers. In particular, cheap, effective, and sustainable powders need to be explored in order to develop new processes which produce beneficial results in relation to economic and environmental aspects. In this context, five samples within commercial and waste vegetable oils were treated with two sodium- and calcium-based bentonites employing a low oil/bentonite ratio (0.15 wt%). The outcomes of the processes were monitored by FT-IR spectroscopy and compared with the data relative to the parent commercial edible oil. In particular, treatment of FT-IR data by multivariate statistical analysis allowed us to determine a chemical fingerprint characteristic of each sample. Important relationships between the overall chemical composition and the specific clay employed and the treatment time (2 or 4 h) were highlighted. Finally, N2 physisorption, TEM microscopy, and FT-IR analyses of the more efficient Na bentonite allowed us to characterize the material and thus to furnish all the information needed to set-up a general protocol for the partial regeneration of waste vegetable oil destined for further processing.
The purification of waste cooking oils (WCOs) through clay-based adsorption is an established recycling method, yet the relationship between clay composition and adsorption efficiency remains an area of active research. The aim of the present research work was to assess the performance of Maghnia bentonite in WCO decoloration and to gain information about the specific refining process. Thus, natural bentonite from the Maghnia region (Algeria) was investigated as an adsorbent for WCO refining for biolubricant production. The adsorption efficiency was evaluated under different conditions, achieving up to 70% decolorization at 10 wt% clay after 4 h of treatment. Structural characterization of the bentonite before and after adsorption was conducted using FT-IR spectroscopy, powder X-ray diffraction (XRD), and X-ray fluorescence (XRF) to assess compositional and morphological changes. FT-IR analysis confirmed the adsorption of organic compounds, XRD indicated minor alterations in interlayer spacing, and XRF revealed ion exchange mechanisms, including a reduction in sodium and magnesium and an increase in calcium and potassium. Adsorption kinetics followed a pseudo-second-order model, with desorption effects observed at prolonged contact times. The pHPZC of 8.3 suggested that bentonite adsorption efficiency is enhanced under acidic conditions. The high decoloration capacity of Maghnia bentonite, combined with the availability and the low cost of the material, suggests a possible industrial application of this material for WCO refinement, especially in lubricant production.