In recent years, the modeling and simulation of lithium-ion batteries have garnered attention due to the rising demand for reliable energy storage. Accurate charge cycle predictions are fundamental for optimizing battery performance and lifespan. This study compares particle swarm optimization (PSO) and grey wolf optimization (GWO) algorithms in modeling a commercial lithium-ion battery, emphasizing the voltage behavior and the current delivered to the battery. Bio-inspired optimization tunes parameters to reduce the root mean square error (RMSE) between simulated and experimental outputs. The model, implemented in MATLAB/Simulink, integrates electrochemical parameters and estimates battery behavior under varied conditions. The assessment of terminal voltage revealed notable enhancements in the model through both the PSO and GWO algorithms compared to the non-optimized model. The GWO-optimized model demonstrated superior performance, with a reduced RMSE of 0.1700 (25 °C; 3.6 C, 455 s) and 0.1705 (25 °C; 3.6 C, 10,654 s) compared to the PSO-optimized model, achieving a 42% average RMSE reduction. Battery current was identified as a key factor influencing the model analysis, with optimized models, particularly the GWO model, exhibiting enhanced predictive capabilities and slightly lower RMSE values than the PSO model. This offers practical implications for battery integration into energy systems. Analyzing the execution time with different population values for PSO and GWO provides insights into computational complexity. PSO exhibited greater-than-linear dynamics, suggesting a polynomial complexity of O(nk), while GWO implied a potential polynomial complexity within the range of O(nk) or O(2n) based on execution times from populations of 10 to 1000.
The deployment of photovoltaic single-phase inverters has been rapidly increasing worldwide. However, the performance of these systems is highly influenced by atmospheric conditions and load variations, necessitating the development of performance indices to enhance their efficiency and energy quality. In this study, four performance indices are proposed to evaluate the efficiency and energy quality of photovoltaic systems quantitatively. The entire process is analyzed, encompassing solar energy capture, DC-DC and DC-AC conversion, and filtering, to deliver maximum energy and quality to the load. Furthermore, eight system parameters are optimized using advanced techniques such as genetic algorithms, particle swarm optimization, and gray wolf optimization. These optimizations enhance the global performance of two critical stages: (1) the maximum power point tracking algorithm based on sliding mode control, which minimizes switching losses in the boost stage, and (2) the effective transfer of captured solar power to the load by optimizing the gains of a PI controller. The PI controller computes the switching triggers for the inverter stage, significantly improving the total harmonic distortion of voltage and current waveforms. Simulation results validate the proposed approach, demonstrating a marked improvement in overall system efficiency (95.8%) when compared to the incremental conductance method (−11.8%) and a baseline sliding mode control configuration (−1.14%).
The analysis of the behavior of lithium-ion batteries has gained considerable interest in recent years. There are different alternatives for the analysis of this behavior; however, depending on the type of modeling, there are application and optimization restrictions. In this work, a hybrid model has been made that is capable of predicting the characteristics of a lithium-ion battery. As a novelty, the simplification, at the same time, facilitates the sampling of parameters for their prompt selection for optimization. A new model open to the user is proposed, which has proven to be efficient in simulation time. For example, one hour simulates it in 5 min, providing information detailing how these parameters, State of Health (SOH), Open Circuit Voltage (VOC), State of charge (SOC), and Number of charge and discharge cycles, in the face of temperature variations and charge and discharge cycles. Opening the possibility of optimizing the parameters with different techniques to estimate the performance and dynamics in the face of temperature change and charge and discharge cycles. A model based on linear regressions, manufacturer characteristics, and integrating equations in the electrical model of electrochemical phenomena is proposed.
Ediciones Comunicación Científica se especializa en la publicación de libros dictaminados, digitales e impresos, mediante el sistema de pares ciegos académicos, acceso abierto al texto completo, métricas, DOI, Epub, indización internacional, ética editorial, comités editoriales, campaña de comunicación en las áreas de humanidades, sociales y ciencias.