In the present work, a low-cost silver natural zeolite (AgN) with clinoptilolite structure and ≈ 9 wt% Ag was specifically designed and evaluated for the capture of methyl iodide (CH3I) in a range of conditions representative of severe nuclear accident (T = 80-140°C, high steam contents, presence of CO, γ-irradiation….). The physicochemical and textural characteristics of AgN were first characterized by SEM-EDX, DR-UV-Visible spectroscopy, N2 porosimetry, elemental analysis and compared to those of well-known synthetic silver faujasite zeolites (AgX and AgY). Common features and differences existing between AgY and AgN in terms of CH3I trapping mechanism were addressed by FTIR spectroscopy and DRIFTS. CH3I adsorption capacities were also computed from CH3I breakthrough curves measured in absence/presence of pre-adsorbed water. Interestingly, the CH3I trapping efficiencies measured at 140°C were found to strongly depend on the type of silver zeolite and steam content. Up to a water content of 42 wt% in the feed, both AgN sorbent and synthetic exchanged faujasites AgX and AgY performed very well, with decontamination factors in the range 5.105-103. At higher humidity (45 wt%), the filling of pores by liquid water induced a rather drastic drop in measured DF values, which is less pronounced for AgY. Additional challenging tests (presence of CO, trapping stability under γ-irradiation) have confirmed the potential of tailored silver zeolites for effective CH3I retention in severe accident scenarios.
Activated carbons (ACs) are employed in the nuclear industry to mitigate the emission of potential radioactive iodine species. Their retention performances towards iodine are mainly dependent on the relative humidity due to the competitive effect induced by adsorbed water molecules. Thus, this work will focus on the prediction of AC behavior toward the capture of water vapor to better assess the poisoning effect on radiotoxic iodine removal. For the first time, H2O breakthrough curves (BTCs) on nuclear grade ACs are predicted through a specific methodology based on the combination of transport phenomena with adsorption kinetics and equilibrium. Three ACs, similar to those deployed in the nuclear context, are considered within the present study. Our model is based on the Linear Driving Force Model (LDF), governed by an intraparticle diffusion mechanism, notably surface and Knudsen diffusions. In addition, the type V isotherms obtained for H2O and the investigated carbon supports were described through the Klotz equation, taking into account the formation and progressive growth of H2O clusters within the internal porosity. This methodology allowed us to successfully simulate the H2O adsorption by a non-impregnated AC, where only physisorption phenomena are involved. In addition, promising results were highlighted when extrapolating to the two other impregnated ACs (AC 5KI and AC Nuclear).