Additive manufacturing (AM) offers a fully integrated fabrication solution within many engineering applications. Particularly, it provides attractive processing alternatives for nickel-titanium...
This study aims to introduce an Unmanned Aerial Vehicle (UAV) platform capable of performing real-time object detection and classification tasks using computer vision techniques in the field of artificial intelligence. Previous scientific research reveals the utilization of two different methods for object detection and classification via UAVs. One of these methods involves transmitting the acquired UAV images to a ground control center for processing, whereafter the processed data is relayed back to the UAV. The other approach entails transferring images over the internet to a cloud system, where image processing is conducted, and the resultant data is subsequently sent back to the UAV. This allows the UAV to autonomously perform predefined tasks. Enabling the UAV with autonomous decision-making capabilities and the ability to perform object detection and classification from recorded images requires an embedded artificial intelligence module. The ability of the UAV to utilize image processing technologies through embedded systems significantly enhances its object detection and classification capabilities, providing it with a significant advantage. This enables the UAV to be used more effectively and reliably in various tasks. In the proposed approach, image processing was achieved by mounting a Raspberry Pi 4 and camera on the UAV. Additionally, a Raspberry Pi-compatible 4G/LTE modem kit was used to provide remote intervention capability, and the Coral Edge TPU auxiliary processor was used to increase object detection speed. The TensorFlow Library and the SSD MobilNetV2 convolutional neural network model were used for image processing. During test flights, accuracy values of approximately 96.3% for car detection and 96.2% for human detection were achieved.
The millimeter-wave passive radiometric imaging systems based on the single channel design are developed. The systems are intended for disclosure of dangerous objects concealed under persons' clothing in short distances and for passive visualization of remote targets. The low-noise compact receiver (noise factor 4.5dB for 90-100GHz) involving four stages was designed. Antenna systems based on aspheric lens and on parabolic reflector were adopted. The radiometric imaging peculiarities of the building materials were investigated. The systems successfully recognize the metallic weapon hidden under outer clothing at a distance about 10m and visualize remote targets at a distance of 170m.
İş sağlığı ve güvenliği bilincinin işyerlerinde ve toplumun her seviyesinde yaygınlaştırılması, okullarda ve işyerlerinde verilen etkili iş sağlığı ve güvenliği eğitimleri ile sağlanabilir. Yetişkin eğitimlerinde yaygın olarak kabul gören uygulamalı eğitimler (Dale, 1969) ve günümüz şartlarının gerektirdiği videolu eğitimler iş sağlığı ve güvenliği eğitimlerinde de git gide yaygınlaşmaktadır. Bu çalışma bir açık maden işletmesine ait çalışanların klasik sınıf eğitimi, videolu eğitim ve uygulamalı eğitim yöntemlerinden hangisinin daha etkili sonuçlar verdiğini araştırmayı amaçlamaktadır. Yapılan eğitimler öncesi ve sonrası katılımcılara uygulanan sınavlardaki başarı oranları IBM SPSS programının farklı test metotları ile değerlendirilmiştir. Yapılan değerlendirmelerde uygulamalı iş sağlığı ve güvenliği eğitimleri alan çalışanların videolu eğitimler ve sınıf eğitimleri alan çalışanlardan daha başarılı olduğu görülmüştür.
The adhesion between rubber compounds and textile cords plays a critical role in determining the overall performance and durability of rubber-based composites, particularly in tire applications. Despite extensive research on adhesion mechanisms, optimizing adhesion through systematic modeling remains challenging due to the complex interactions between rubber formulations, textile treatment, and processing conditions. This study presents an integrated experimental and predictive modeling approach to investigate and optimize the adhesion performance of nylon 6.6 textile cords in rubber compounds. Initially, the effects of different accelerator types—including diphenyl guanidine (DPG), 2,2′-Dithiobis(benzothiazole) (MBTS), N-tert-butyl-2-benzothiazole sulfenamide (TBBS), and N-cyclohexyl-2-benzothiazole sulfenamide (CBS)—on adhesion properties were systematically evaluated. Key parameters such as cure characteristics, Mooney viscosity, and mechanical properties of the rubber compounds were analyzed using a moving die rheometer (MDR), Mooney viscometer, and tensometer. To enhance adhesion performance, a statistical optimization approach based on the Box–Behnken design was employed, focusing on the influence of accelerator, curing agent, and resin contents. The results indicate that an optimized rubber formulation comprising 1.6 phr curing agent, 0.3 phr resin (HMMM), and 0.5 phr accelerator (MBTS) yields the highest adhesion strength. This study provides the first systematic modeling of adhesion between nylon 6.6 textile cords and rubber compounds using response surface methodology (RSM), offering valuable insights into the material design for improved interfacial bonding in tire manufacturing.
Türkiye’de iş sağlığı ve güvenliği uygulamaları, 2012 yılından itibaren 6331 sayılı İş Sağlığı ve Güvenliği Kanunu ile istisna kapsamında bırakılan bazı kişiler ve faaliyetler dışında tüm işyerleri için zorunlu hale gelmiştir. Daha öncesinde iş sağılığı ve güvenliği çok tehlikeli ve sanayiden sayılan işyerleri için geçerliydi. Bu durumla ciddi olarak ilk defa yüz yüze kalan işyerleri uygulamada sıkıntılar yaşamaktadır. Sağlık ve güvenlik açısından eksikliklerin belirlenmesi, giderilmesi ve mevzuata uyumun sağlanması ve çalışanların bu tedbirleri benimsemesi zaman almaktadır. Herhangi bir rehberi olmayan tehlikeli ve az tehlikeli olarak konumlandırılan işyerleri 2012 sonrası kapsamlı iş sağlığı ve güvenliği yükümlülüklerini yerine getirmekte zorluk yaşamaktadır. Bu çalışmanın amacı Türkiye’de iş sağlığı ve güvenliği ile ilgili rehberi olmayan ve tehlikeli işyeri olarak değerlendirilen cenaze hizmeti yürüten işyerlerinde iş sağlığı ve güvenliğini iyileştirmek ve rehber olmak için özel faaliyetleri ile ilgili risk değerlendirmesi yapmaktır. Fine-Kinney yöntemini kullanarak cenaze hizmetlerinde bu işe özgü 3 ana faaliyet ve Covid-19 (koronavirüs) salgını için risk değerlendirmesi yapılmıştır. Bu değerlendirme sonucunda, binalar, çalışma alanı, iş süreçleri, çalışan özellikleri, mesleki yeterlilik, çalışma biçimleri, kimyasallar, atık yönetimi, kullanılacak araçlar, kişisel hijyen, temizlik, dezenfeksiyon, sağlık gözetimi ve kişisel koruyucu donanımlar gibi konuların riski azaltmak veya ortadan kaldırmak için önemli olduğu ortaya çıkmıştır.