Computational fluid dynamics (CFD) is a powerful tool to model fluid flow motions for momentum, mass and energy transfer. CFD has been widely used to simulate the flow pattern and temperature distribution during the thermal processing of foods. This paper discusses the background of the thermal processing of food, and the fundamentals in developing CFD models. The constitution of simulation models is provided to enable the design of effective and efficient CFD modeling. An overview of the current CFD modeling studies of thermal processing in solid, liquid, and liquid-solid mixtures is also provided. Some limitations and unrealistic assumptions faced by CFD modelers are also discussed.
A standardized method to evaluate the material properties of surimi gels has to be updated because of the lack of accuracy and the repeatability of data obtained from conventional ways. To investigate the relationships between the different texture measurement methods used in surimi gels, 250 batches of different surimi gels were used. The textural properties of surimi gels made with or without whey protein concentrate (SG-WP), potato starch (SG-PS), or dried egg white (SG-EW) were measured under torsion, tensile, and penetration tests. The correlation between the textural properties related to the deformation and hardness of surimi gels without any added ingredients (SG) was linear (R2 > 0.85). However, the R2 values of the shear strain and tensile strain of SG-WP and SG-EW were significantly lower than that of SG. The strain distributions of surimi gels with and without added ingredients were estimated by digital image correlation (DIC) analysis. The results showed that the local strain concentration in SG-WP and SG-EW was significantly higher than that of SG in the failure ring tensile test and the torsion test (p < 0.05). DIC analysis was an effective tool for evaluating the strain distribution characteristics of surimi gels upon fracture from torsion, penetration, and tension.
30 April 2019 in International Journal of Food Engineering
Alaska pollock (AP) surimi paste was prepared (0–3% salt and 76–84% moisture). The density, specific heat, and thermal conductivity were measured and modelled in temperatures between 25 and 90 °C ( R2 > 0.92). The thermal diffusivity (α) function showed a strong dependence on the moisture content and a unique salt dependence at 84% of the moisture content and applied to the heat transfer simulation of surimi paste. The simulation model coupled with the empirical thermal properties accurately predicted the heat penetration curves during heating with RMSE values ranging from 0.43 to 1.22 °C. The salt dependence on thermal diffusivity was identified and modeled only at 84% moisture content. With a model for 84% moisture content, the RMSE value of 3% salt content decreased from 1.11 °C to 0.56 °C. This study demonstrated that an accurate prediction of the heat transfer of the surimi paste needs to be coupled with the nonlinear thermal diffusivity functions.