Ailing Zou

Dr. Ailing Zou

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 December 2023 in Journal of Thermoplastic Composite Materials
Verified
Journal Article
Closed access
XJXibin Jiang
Xibin Jiang
ZSZhongde Shan
Zhongde Shan
YZYong Zang
Yong Zang
FLFeng Liu
Feng Liu
XWXiaochuan Wu
Xiaochuan Wu
AZAiling Zou
Ailing Zou
Continuous fiber reinforced thermoplastic composites (CFRTP) have been increasingly used in aerospace and rail transport in recent years because of their high strength and light weight. In this paper, the effects of nozzle temperature, printing speed, substrate temperature and layer thickness on the tensile properties and macro/microscopic damage modes of CAF/PA12 printed specimens was systematically investigated. The fiber volume fraction(FVF) of CAF/PA12 filaments was 25.62%. The maximum average tensile strength and tensile modulus of CAF/PA12 printed specimens reached 572.60 MPa and 18.49 GPa, respectively. The results of the cross-sectional analysis indicated that filament toothed fractures and transverse cracks were the main macroscopic failure modes of CAF/PA12 composites. In SEM images, the main microscopic failure modes of CAF/PA12 composite are fiber fracture, fiber pull-out pores and unimpregnated fibers.

13 January 2024 in Additive Manufacturing
Verified
Journal Article
Closed access
XLXiaojun Liu
Xiaojun Liu
ZSZhongde Shan
Zhongde Shan
JLJianhua Liu
Jianhua Liu
FLFeng Liu
Feng Liu
XWXiaochuan Wu
Xiaochuan Wu
XJXibin Jiang
Xibin Jiang

2 April 2015 in Journal of Materials Science: Materials in Electronics
Verified
Journal Article
Closed access
PDF file
AZAiling Zou
Ailing Zou
LHL. Z. Hu
L. Z. Hu
YQY. Qiu
Y. Qiu
GCG. Y. Cao
G. Y. Cao
JYJ. J. Yu
J. J. Yu
LXL. L. Xu
L. L. Xu

1 January 2022 in Composites and Advanced Materials
Verified
Journal Article
Open access
AZAiling Zou
Ailing Zou
ZSZhongde Shan
Zhongde Shan
SWShaozong Wang
Shaozong Wang
XLXiaojun Liu
Xiaojun Liu
XMXueya Ma
Xueya Ma
XJXibin Jiang
Xibin Jiang
Continuous fiber additive manufacturing technology has developed rapidly in recent years, and pore has a great influence on the properties of composites. Through the optimization process of aramid fiber (AF) reinforced composite filament forming, the internal porosity of composites filament was reduced, and stable wire was provided for continuous fiber additive manufacturing. A mathematical model of 0° fiber orientation porosity was established, and the porosity of composites was measured by Micro-CT, and the correctness of the mathematical model was verified with the absolute error of 0.26%, and the relative error of 2.16%. The process parameters of printing speed, printing layer thickness, and printing spacing were designed by orthogonal experiment. The relationship between interlaminar shear properties and porosity of composites with 0° fiber orientation was studied.

3 April 2019 in Journal of Materials Science: Materials in Electronics
Verified
Journal Article
Closed access
PDF file
AZAiling Zou
Ailing Zou
SSShixue Sun
Shixue Sun
JYJingjie Yu
Jingjie Yu
NZNianyu Zou
Nianyu Zou
ZHZeqing Hu
Zeqing Hu
YZYanjie Zhang
Yanjie Zhang

13 May 2025 in Processes
Verified
Journal Article
Open access
PDF file
XZXingwei Zhou
Xingwei Zhou
WYWanran Yang
Wanran Yang
HGHaiyu Guo
Haiyu Guo
SWShaozong Wang
Shaozong Wang
BWBoya Wang
Boya Wang
LHLiang HOU
Liang HOU
Optimizing superplastic forming (SPF) process parameters is vital for improving production efficiency and addressing the growing complexity of product requirements in high-end manufacturing fields. Current optimization of SPF process parameters focuses on meeting product requirements, often overlooking constraints related to quality indicators, process, and equipment limitations. This paper proposes an optimization approach that integrates SPF manufacturing process information using model-based systems engineering and simulation validation techniques to establish a continuous mapping between product requirements, process parameters, and equipment control parameters. First, SPF is modeled using the systems modeling language to describe the relationships between processes and equipment. Then, the process parameters are extracted via object flow analysis and categorized according to shape and performance control. The key process parameters and impact indicators for meeting customized product requirements are identified using the analytic hierarchy process. Finally, orthogonal experimental design and process simulation are employed to optimize the parameters, with the results mapped onto the physical model to guide the equipment control parameter design. A case study demonstrates its feasibility and effectiveness in meeting customized products.