Radio Frequency Identification (RFID) is a key component in automatic systems that address challenges in environment monitoring. However, tag collision continues to be an essential challenge in such applications due to high-density RFID deployments. This paper addresses the issue of RFID tag collision in large-scale intensive tags, particularly in industrial membrane contamination monitoring systems, and improves the system performance by minimizing collision rates through an innovative collision-avoiding algorithm. This research improved the Predictive Framed Slotted ALOHA–Collision Tracking Tree (PRFSCT) algorithm by cooperating probabilistic and deterministic methods through dynamic frame length adjustment and multi-branch tree processes. After simulation and validation in MATLAB R2023a, we performed a hardware test with the RFM3200 and UHFReader18 passive tags. The method’s efficiency is evaluated through collision slot reduction, delay minimization, and enhanced throughput. PRFSCT significantly reduces collision slots when the number of tags to identify is the same for PRFSCT, Framed Slotted ALOHA (FSA), and Collision Tracking Tree (CTT); the PRFSCT method needs the fewest time slots. When identifying more than 200 tags, PRFSCT has 225 collision slots for 500 tags compared to FSA and CTT, which have approximately 715 and 883 for 500 tags, respectively. It demonstrates exceptional stability and adaptability under increased density needs while improving tag reading at distances.

With the evolution of Reconfigurable Intelligent Surface (RIS) technology, its potential for dynamically optimizing wireless channels has garnered significant attention. However, existing methods still face challenges in real-time control in complex environments due to high computational complexity. To address this, this paper proposes a reconfigurable wireless channel optimization framework based on Intelligent Metasurfaces 2.0 and designs a low-complexity control strategy. The strategy integrates an adaptive adjustment mechanism and multi-dimensional feedback, aiming to reduce system computational load. Experimental results show that compared to traditional methods (such as MRC and MMSE), the proposed method improves signal transmission quality (SNR improvement of 3.8 dB) and system stability (exponential increase to 0.92). When compared to advanced deep reinforcement learning (DRL) and graph neural network (GNN) methods, it achieves similar signal quality while reducing computational overhead by 20.0% and energy consumption by approximately 32.4%. Ablation experiments further verify the effectiveness and synergistic role of the proposed core modules. This study provides a feasible approach toward high-efficiency, low-complexity dynamic channel optimization in 5G and future communication networks.

Topology control is important for extending networks lifetime and reducing interference. The accuracy of topology identification plays a crucial role in topology control. Traditional passive interception can only identify the connectivity among cooperative sensor networks with known protocol. This paper proposes a novel method called Active Interfere and Passive Interception (AIPI) to identify the topology of non-cooperative sensor networks by using both active and passive interceptions. Active interception uses full duplex sensors to disrupt communication until frequency hopped to acquire distance information, and thus, infer their connectivity and calculate the location after modifying error in a non-cooperative sensor network. Passive interception uses Granger causality to infer the connectivity between two communication nodes after getting the time frame structure in physical layer. Passive interception is applied to conserve power consumption after obtaining physical information via active interception. Simulation results indicate that AIPI can identify the topology of non-cooperative sensor networks with a higher accuracy than traditional method.