Purpose – The purpose of this paper is to evaluate the performance of 3D printed materials for use as rapid tooling (RT) molds in low volume thermoforming processes such as in manufacturing custom prosthetics and orthotics. Design/methodology/approach – 3D printed specimens of different materials were produced using the Z-Corp process. The parts were post processed using both standard and alternative methods. Material properties relevant to the 3D printed parts such as pneumatic permeability, flexural strength and wear rate were measured and compared to standard plaster compositions commonly used. Findings – Three-dimensional printing (3DP) can replicate the performance of the plaster materials traditionally used in prosthetic/orthotic applications by using modified post process techniques. The resulting 3D printed molds can still be modified and adjusted using traditional methods. The results show that 3D printed molds are feasible for thermoforming prosthetic and orthotic devices such as prosthetic sockets while providing new flexibility. Originality/value – The proposed method for RT of a mold for prosthetic/orthotic manufacturing provides great flexibility in the manufacturing and fitting process while maintaining proven materials in the final device provided to patients. This flexibility increases the value of digital medical records and efforts to develop model-based approaches to prosthetic/orthotic device design by providing a readily available process for recreating molds. Depending on the needs of the practitioners and patients, 3DP can be incorporated at a variety of points in the manufacturing process.
Purpose – Solid freeform fabrication processes such as three-dimensional printing (3DP) and selective laser sintering (SLS) produce porous parts. Metal parts produced by these processes must be densified by sintering or infiltration to achieve maximum material performance. New steel infiltration methods can produce parts of standard alloy compositions with properties comparable to wrought materials. However, the infiltration process introduces dimensional errors due to both shrinkage and creep — particularly at the high temperatures required for steel infiltration. Aims to develop post-processing method to reduce creep and shrinkage of porous metal skeletons. Design/methodology/approach – The proposed process treats porous metal parts with a nanoparticle suspension that strengthens the bonds between particles to reduce creep and sintering shrinkage during infiltration. The process is tested by comparing the deflection and shrinkage of treated and untreated cantilevers heated to infiltration temperatures. The method is demonstrated with an iron nanoparticles suspension applied to parts made of 410 SS powder. Findings – This process reduced creep by up to 95 percent and shrinkage by 50 percent. The best results were obtained using multiple applications of the nanoparticles dried under a magnetic field. Carbon deposited with the iron is shown to provide substantial benefit, but the iron is critical to establish strong bonds at low temperatures for minimal creep. Research limitations/implications – This work shows that dimensional stability of porous metal skeletons during infiltration processes can be significantly improved by treatment with nanoparticles. The increased dimensional stability afforded by this technique can combine the excellent properties of homogenous infiltration with substantially improved part accuracy and open up new applications for this manufacturing technology. Originality/value – The work shows how solid freeform fabrication processes can be improved.
Purpose: Additive manufacturing (AM) offers substantial flexibility in shape, but much less flexibility in materials and functionality – particularly at small size scales. A system for automatically incorporating microscale components would enable the fabrication of objects with more functionality. The purpose of this paper is to consider the potential of self‐assembly to serve as an automated programmable integration method. In particular, it addresses the ability of random self‐assembly processes to successfully assemble objects with high performance despite the possibility of assembly errors.Design/methodology/approach: A self‐assembled thermoelectric system is taken as a sample system. The performance expectations for these systems are then predicted using modified one‐dimensional models that incorporate the effects of random errors. Monte‐Carlo simulation is used to predict the likely performance of self‐assembled thermoelectric systems and evaluate the impact of key process and system design parameters.Findings: While assembly yield can drop quickly with increasing numbers of assembled parts, large functional assemblies can be constructed by arranging components in parallel to provide redundancy. In some cases, the performance losses are minimal. Alternatively, sensing can be incorporated to identify perfect assemblies. For small assemblies, the probability of perfection may be high enough to achieve an acceptable assembly rate. Small assemblies could then be combined into larger functional systems.Originality/value: The paper identifies two strategies that can guide the development of AM processes that incorporate miniature components to increase the system functionality. The analysis shows that this may be possible despite significant errors in the self‐assembly process because systems may be tolerant of significant assembly errors.