Jie Chen

Dr. Jie Chen


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2021 in Chinese Physics B
Verified
Journal Article
Closed access
PDF file
JCJie Chen
Jie Chen
ZTZhijian Tan
Zhijian Tan
WLWeiqiang Liu
Weiqiang Liu
SDSihao Deng
Sihao Deng
SWShengxiang Wang
Shengxiang Wang
TLTianjiao Liang
Tianjiao Liang
The neutron Bragg-edge imaging is expected to be a new non-destructive energy-resolved neutron imaging technique for quantitatively two-dimensional or three-dimensional visualizing crystallographic information in a bulk material, which could be benefited from pulsed neutron source. Here we build a Bragg-edge imaging system on the General Purpose Powder Diffractometer at the China Spallation Neutron Source. The residual strain mapping of a bent Q235 ferrite steel sample has been achieved with a spectral resolution of 0.15% by the time-of-flight neutron Bragg-edge imaging on this system. The results show its great potential applications in materials science and engineering.

17 July 2024 in Journal of Applied Physics
Verified
Journal Article
Open access
PDF file
ZZZhao Zhang
Zhao Zhang
THTakanori Hattori
Takanori Hattori
RSRuiqi Song
Ruiqi Song
DYDehong Yu
Dehong Yu
RMRichard Mole
Richard Mole
BLBing Li
Bing Li
Solid-state refrigeration using barocaloric materials is environmentally friendly and highly efficient, making it a subject of global interest over the past decade. Here, we report giant barocaloric effects in sodium hexafluorophosphate (NaPF6) and sodium hexafluoroarsenate (NaAsF6) that both undergo a cubic-to-rhombohedral phase transition near room temperature. We have determined that the low-temperature phase structure of NaPF6 is a rhombohedral structure with space group R3¯ by neutron powder diffraction. There are three Raman active vibration modes in NaPF6 and NaAsF6, i.e., F2g, Eg, and A1g. The phase transition temperature varies with pressure at a rate of dTt/dP = 250 and 310 K GPa−1 for NaPF6 and NaAsF6. The pressure-induced entropy changes of NaPF6 and NaAsF6 are determined to be around 45.2 and 35.6 J kg−1 K−1, respectively. The saturation driving pressure is about 40 MPa. The pressure-dependent neutron powder diffraction suggests that the barocaloric effects are related to the pressure-induced cubic-to-rhombohedral phase transitions.

30 December 2020 in Chinese Physics B
Verified
Journal Article
Closed access
PDF file
SWSheng-Xiang Wang
Sheng-Xiang Wang
JCJie Chen
Jie Chen
ZTZhi-Jian Tan
Zhi-Jian Tan
SDSi-Hao Deng
Si-Hao Deng
YWYao-Da Wu
Yao-Da Wu
LHLun-Hua He
Lun-Hua He
Ring artifacts will happen mostly when the detector has inconsistent response among the detector channels, and the characteristic produced rings centered in the iso-center in the reconstructed slices inevitably affect the recognition and analysis of the corresponding sample structures in neutron computed tomography (CT). In this work, a ring correction method based on the projection-field (RCP) is proposed, it is a pre-processing method and provides the corrected projection data directly, which is also conducive to efficient data storage and other algorithmic researches. Simulation and physical experiments are performed for verifying the effect of the method, and one of the correction methods based on the image-field is used for comparison. The results demonstrate that the RCP can correct the ring artifacts well without reducing the image resolution or over-correction.

20 April 2022 in Journal of Physics: Condensed Matter
Verified
Journal Article
Open access
ZMZhengzheng Ma
Zhengzheng Ma
LTLei Tan
Lei Tan
HHHaijun Huang
Haijun Huang
LHLunhua He
Lunhua He
JCJie Chen
Jie Chen
MDMartin T Dove
Martin T Dove
We report results from a study of the crystal and magnetic structures of strontium-doped BiFeO3 using neutron powder diffraction and the Rietveld method. Measurements were obtained over a wide range of temperatures from 300–800 K for compositions between 10%–16% replacement of bismuth by strontium. The results show a clear variation of the two main structural deformations—symmetry-breaking rotations of the FeO6 octahedra and polar ionic displacements that give ferroelectricity—with chemical composition, but relatively little variation with temperature. On the other hand, the antiferromagnetic order shows a variation with temperature and a second-order phase transition consistent with the classical Heisenberg model. There is, however, very little variation in the behaviour of the antiferromagnetism with chemical composition, and hence with the degree of the structural symmetry-breaking distortions. We therefore conclude that there is no significant coupling between antiferromagnetism and ferroelectricity in Sr-doped BiFeO3 and, by extension, in pure BiFeO3.

1 March 2018 in Materials Science and Technology
Verified
Journal Article
Closed access
QWQi-Wen Wang
Qi-Wen Wang
CLChangsheng Li
Changsheng Li
JCJie Chen
Jie Chen
XTXing-Yang Tu
Xing-Yang Tu
Thermal simulated specimens with the heat inputs of 20, 50 and 80 kJ/cm were used to investigate the effects of heat input on the microstructure and mechanical properties of the Fe–2Cr–Mo–0.12C pressure-vessel steel. The results indicated that the microstructures in the coarse-grained heat affected zone of tested steels with various heat inputs were mainly consisted of lath martensite and bainite ferrite. As the heat input increased, the fraction of martensite decreased and the bainite ferrite fraction increased. The toughness (tested at −40°C) and hardness for the heat input of 50 kJ/cm were 102 J and 346 HV, respectively, which was attributed to the high-volume fraction (60%) of the high-angle grain-boundary and the fine bainite lath. This paper is part of a thematic issue on Nuclear Materials.

27 May 2024 in Applied Physics Letters
Verified
Journal Article
Open access
PDF file
JLJianchao Lin
Jianchao Lin
QZQinghua Zhang
Qinghua Zhang
PTPeng Tong
Peng Tong
XZXuekai Zhang
Xuekai Zhang
XZXiaoguang Zhu
Xiaoguang Zhu
YSYuping Sun
Yuping Sun
Strain engineering is an alternative to chemical modification in manipulating functionalities of materials. Here, we report the lattice strain could relax the abrupt phase transition of (Ni1−xFex)1−δS and lead to an excellent negative thermal expansion (NTE) effect. The high-resolution scanning transmission electron microscope and extended x-ray absorption fine structure unambiguously demonstrate that parallel Ni3S4-type nanosheets could be introduced into the matrix lattice by increasing the δ value. By forming the Ni(Fe)-S-Ni(Fe) bonds, the (1–11) plane of nanosheets epitaxially grows on the (002) plane of the hexagonal matrix. Those bonds are strong enough to bear the large lattice mismatch along the interface as the phase transition occurs. As the concentration of nanosheets increases, the weak and inhomogeneous strain in matrix lattice becomes strong and uniform, expanding the NTE window in different ways. This result opens an unconventional avenue for designing NTE materials and extends the research scope of lattice strain as well.