Zero sequence voltage (ZSV) can cause zero sequence current (ZSC), while variation of common mode voltage (CMV) can cause bearing current in an open winding (OW) permanent magnet synchronous machine (PMSM) fed by common DC-bus dual two-level inverters. This paper proposes a novel space vector pulse width modulation (SVPWM) strategy for simultaneously eliminating CMV variation and suppressing full frequency ZSC harmonics in either linear or over modulation region by optimal selection of switching combinations. The proposed SVPWM can reduce large ZSV ripples and number of switching actions in the conventional CMV control method for the common DC-bus OW drive. Thus, high-frequency ZSC harmonics and switching frequency can be significantly reduced in both linear and over modulation regions. Moreover, the proposed SVPWM can suppress large low-frequency ZSC harmonics induced by the conventional method in over modulation region. The superior performances of CMV variation elimination and full frequency ZSC suppression in the proposed SVPWM are verified by experiments.
14 October 2023 in International Communications in Heat and Mass Transfer
In this paper, a novel space vector pulse width modulation (SVPWM) with zero sequence current (ZSC) control strategy is proposed to extend the operation range for an open winding (OW) permanent magnet synchronous machine (PMSM). The proposed SVPWM can achieve the ZSC control and extend the operation range by considering voltages in the zero sequence axis and voltage vectors in the αβ-plane, both of which are mapped by switching combinations in an OW drive. The effect of switching combinations with non-null zero sequence voltage on the modulation region of a common-DC bus OW-PMSM is investigated for the first time. The proposed SVPWM has the optimal selection of switching combinations on the large hexagon rather than on the small hexagon in the conventional SVPWM for ZSC control, and still maintains the controllability of ZSC in the over modulation region. Compared with the conventional SVPWM strategy, the operation range of the OW-PMSM can be extended over 10% with the proposed SVPWM strategy. The performance of both the conventional and the proposed SVPWMs are compared experimentally.
4 January 2022 in IEEE Transactions on Industry Applications
In this paper, two novel sinusoidal pulse width modulation (SPWM) strategies with simple implementation are proposed for an open-winding machine fed by isolated DC-bus dual two-level three-phase inverters to reduce switching frequency and current harmonics. The proposed strategies utilize zero sequence voltage injection and unbalanced reference voltage distribution to generate discontinuous PWM with low current harmonics and less switching action. Two different zero sequence voltages are introduced in this paper corresponding to two proposed PWM strategies with different switching actions in a PWM cycle. The novelty of this paper is low current harmonics and less switching actions in a PWM cycle compared with the conventional SPWM strategy. Moreover, compared with the sub-hexagonal center PWM strategy, the proposed SPWM strategies have advantages of easy implementation and half switching commutations with the same current harmonic characteristics. The superiority of the proposed SPWM strategies is validated by simulation and experiment results.
27 August 2021 in IEEE Transactions on Energy Conversion
Different from the induced electromotive force (EMF) in armature winding, the induced EMF in excitation winding is detrimental to the performance of wound field synchronous machines by causing unstable excitation field and thus extra torque pulsation and losses. Moreover, it also imposes challenges to machine control, particularly for high-speed operation. This article investigates the induced EMF in the excitation winding of 3-phase non-overlapped stator wound field synchronous machines (SWFSMs). It has revealed that the amplitude of the excitation winding induced EMF is largely dependent on the slot-pole combination. Therefore, with suitable slot-pole combinations, the induced EMF issue will be significantly alleviated by eliminating low-order induced EMF harmonics. Although the excitation winding induced EMF can also be reduced by passive techniques, e.g., optimization and shaping of rotor pole arc, the average torque will be greatly degraded as well. Finally, the finite element predictions are validated by measurements on two prototyped non-overlapped SWFSMs.
6 April 2022 in IEEE Journal of Emerging and Selected Topics in Power Electronics
In this article, a novel inverter nonlinearity compensation method is proposed for open-winding (OW) machines fed by isolated dc-bus dual two-level three-phase inverters with dual switching modes. Inverter nonlinearity of dual inverters is analyzed in both balanced and unbalanced switching modes, and the different voltage distortions are utilized for a closed-loop inverter nonlinearity compensation by alternately applying the two switching modes. The proposed strategy needs no off-line measurement for the parameters of dual inverters and the electrical machine, and can also deal with the variation of inverter parameters in different operation conditions. Furthermore, the proposed strategy can overcome issues in conventional current harmonic-based methods, such as the need for accurate rotor position and preset compensation voltage curves. Experimental results verify the performance of the proposed inverter nonlinearity compensation method.