In recent years, additive manufacturing technologies have been employed for ecological projects, especially those connected with artificial reefs. This approach brings a lot of advantages, including the design of more complex structures, with surfaces fitted to the needs of water organisms. This technology can effectively support ecological design and engineering, especially in restoration efforts. The main aim of this article is to demonstrate the state of the art and further perspectives for the development of artificial coral reefs. This article is based on a critical analysis of the literature, supported by selected case studies. This article describes current technologies used in the creation of artificial reefs, putting emphasis on additive manufacturing, evaluates currently used materials, and summarizes the influence of this technology on ecosystems through the analysis of selected case studies. It also discusses the challenges and limitations of current technologies used in 3D printing artificial reefs as well as presents current trends and further directions. The most important findings show that the analyzed field is a promising interdisciplinary research area and practical implementations require collaboration between specialists from different branches.

This article presents experimental studies on the characterization of geopolymer composites intended for applications in aquatic environments, with particular emphasis on underwater infrastructure. The motivation for conducting the research was the growing need to develop durable and ecological building materials that will be resistant to long-term exposure to moisture and aggressive chemical agents, typical for the underwater environment, where traditional cement concretes undergo gradual degradation due to long-term water impact, including hydrotechnical and underwater infrastructure. Geopolymer binders were produced based on metakaolin activated by alkaline solutions containing sodium hydroxide. Several series of mixtures with additives such as blast furnace slag, amphibolite and carbon fibers were developed to evaluate the effect of these components on mechanical strength, water absorption and chemical durability. The conducted studies showed that slag additions improved mechanical properties, for the best composition it across 50 MPa. In contrast, the addition of amphibolite had an unfavorable effect, which probably results from introducing inhomogeneity into the material structure. The presence of carbon fibers promoted matrix cohesion, but their uneven distribution could lead to local strength differences. Water absorption tests have shown that geopolymers reach full water saturation within 24 to 48 h, which indicates rapid establishment of capillary equilibrium and limited further water penetration. The conclusions from the work indicate that geopolymer composites with a moderate amount of blast furnace slag and subjected to appropriate curing conditions. High strength, water and chemical resistance make them suitable for, among others, the construction of marine foundations, protection and structural shields of submerged applications.

The pollution of water, including salt and fresh water, has become an emergency problem. Pollutants come from different sources and have various characteristics, starting from industry and fertilizers used in agriculture, sewage related to human living, and other sources. Diverse sources of pollution require a comprehensive approach to water purification. One possible approach may be the use of appropriate sorbents. Currently, one of the most promising materials used is zeolites. This is because they can come from various sources, including waste raw materials such as fly ash, and, therefore, allow for the use of a circular economy approach. Moreover, these materials can be modified, which enables their selective use for selected types of pollutants. Eventually, these materials become economically viable options. The main aim of this article is to present and analyze possible solutions to water pollution based on zeolite materials. For this purpose, a critical literature review was prepared. The review reveals that zeolites perform particularly well in ion-exchange-driven removal of inorganic contaminants, while their effectiveness for organic micropollutants under realistic conditions is often limited. The identified trade-offs between removal efficiency, regeneration stability, and scalability indicate that zeolites are best applied as function-specific rather than universal sorbents. From a sustainability perspective, this targeted applicability is supported by advantages, such as low material cost, long service life, and the possibility of using naturally occurring or waste-derived precursors, which, together, enable resource-efficient water treatment processes, reduced reliance on energy-intensive technologies, and the valorization of industrial byproducts within circular economy frameworks.