Based on the observation of the geochemical characteristics of 19 hot springs in the Litang Fault Zone (LFZ) from 2010 to 2019, the major elements, trace elements, and stable isotopes were investigated, and a conceptual model of ground fluid circulation in the LFZ was established. The main hydrochemical type of hot spring water samples is HCO₃⁻-Na⁺. The δ²H values range from −157.6‰ to −123.4‰ and δ¹⁸O values range from −24.5‰ to −15.4‰. The hot spring water in the Litang fault zone is mainly recharged by infiltrating precipitation, with a recharge elevation of 4062~6018 m. Hydrochemical types of Litang hot springs are mainly controlled by the circulation of groundwater in a deep fault system, and are related to the rock lithology of thermal reservoir and water–rock reaction areas. Hot springs in the Litang fault zone attribute to three different heat sources, belonging to three geothermal systems. The flow direction of groundwater in the LFZ is roughly from northwest to southeast along the Litang fault. The deeper the circulation depth of hot spring water on the fault, the higher the thermal reservoir temperature and the stronger the seismic activity of the segment, which is closely related to the increase in pore fluid pressure, rock weakening, and deep fluid upwelling. This study is helpful for further study on regional hydrogeological environments and provides a scientific basis for revealing geothermal fluid movement in fault zones.

Hydrogeochemical characterization studies are regarded as an important method for determining the origin of hot springs. The major elements, trace elements, and stable isotopes of four groups of hot spring water samples and two groups of gas samples collected from the intersection of the Altyn Tagh fault zone and the East Kunlun fault belt were investigated in this study. The hot spring water temperature ranged between 6 °C and 14 °C. The water chemistry types of the hot springs were Na·Mg-Cl, Mg·Na-Cl·HCO₃, Na-Cl·SO₄, and Na-Cl·HCO₃. The δD values ranged from −50.00% to −68.60%, while the δ¹⁸O values ranged from −6.90% to −8.60%. The hot spring water was recharged mainly by infiltrating precipitation, with a recharge elevation of 3390~3676 m. The heat storage temperature ranged from 66.7 to 164.9 °C. The circulation depth was estimated to range between 1043 and 2679 m. The strontium isotopic composition of the water samples in response to the main weathering sources comprised carbonate and sulfate. CO₂ was the main component in the hot spring gas in the study region, and its content was over 95%. The ³He/⁴He-R/Ra relationship diagram revealed that the mantle-sourced helium from the Yitunbulake spring was 3.06%. In comparison, that from the Aiken spring was 7.38%, which indicated an intrusion of mantle-source material mixed into the hot springs in the study region. The crustal marine limestone contributed significantly to the carbon inventory of the hot spring gas samples (>75%). The dissolution of the marl aquifer resulted in the release of CO₂. Carbon was primarily obtained through metamorphism and hydrothermal reactions in the basement lithologies. The Yitunbulake and Aiken hot springs are found near the intersection of the Arjin and East Kunlun fractures, where the water–rock response is relatively strong and the depth of circulation and thermal storage temperature are both high. This causes relatively high ambient pressure to be released from the deep fluid, resulting in microseismic activity in this region. The continuous observation of Aiken spring water chemistry allows for the monitoring of fracture activity in the region. The results of the study could serve as a foundation for further exploration of the relationship between geothermal water and deep faults, shallow geological formations, hydrogeological conditions, and geothermal resource development in the region.

The coupling relationship between regional seismic activity and the hydrogeochemical field provides an important theoretical basis for regional earthquake precursor exploration. The intersection area of the Red River fault zone (RRF) and the Xiaojiang fault zone (XJF) in southeast Yunnan province has become the focus area of earthquake monitoring and prediction because of its special tectonic position in China. There were 20 hot springs that were sampled and analyzed in the laboratory for major elements, including trace elements, silica, stable isotopes (δ¹⁸O and δD), and strontium isotopes, from the years 2015 to 2019. (1) The meteoric water is the main source of recharge for thermal springs in the study area, and recharged elevations ranged from 1.1 to 2 km; (2) the geothermometer method was used to estimate the region of thermal storage temperature, and its temperature ranged between 64.3 to 162.7 °C, whereas the circulation depth ranged from 1.1 to 7.2 km. Hydrochemical types were mainly controlled by aquifer lithology, in which sodium bicarbonate and sulphuric acid water gathered mainly in the RRF, while calcium bicarbonate water gathered mainly in the XJF. According to the silicon–enthalpy equation method, the temperature range and cold water mixing ratio were 97–268 °C and 61–97%, respectively; (3) the circulation depth of the RRF was deeper than that of the XJF, and it was mainly concentrated in the second segment and the fourth segment on the RRF. Most of the hot spring water was immature with a weak water–rock reaction; (4) the hot water intersections of RRF and XJF were obviously controlled by the fault and the cutting depth of granite; (5) the relationship discussed between geothermal anomaly and earthquake activity had a good correspondence with regional seismicity. The intensity of the reaction between underground hot water and the surrounding rock may lead to the change of pore pressure, and the weakening effect of groundwater on fracture may change accordingly, followed by the change in the adjustment of tectonic stress. Eventually, the difference in seismic activity was shown, implying that deep fluid has an important control action on the regional seismicity.

Trace elements in hot-spring waters are indicators for tracing hydrochemical processes, such as the deep circulation of geothermal water, the degree of water–rock interaction, redox reactions, the contamination of shallow water by thermal water, etc. In this study, 74 hot springs in the Xianshuihe–Xiaojiang Fault Zone (XSHF-XJF) were chosen for an investigation of the geochemical characteristics of trace elements using classic geochemical tools and multivariate statistical analysis. The results indicated (1) the hot-spring waters were mainly derived from atmospheric precipitation as indicated by δD and δ¹⁸O values that generally increased with decreasing elevations; (2) the high concentrations of B, As, Fe, and Mn in the waters, as well as the values of the Water Quality Index (WQI), indicated that the water quality was spatially heterogeneous and the hot-spring waters are not entirely suitable for drinking; and (3) B/Cl ratios showed that hot springs have different reservoir sources in the XSHF and XJF, respectively. The leaching of surrounding rock during water circulation contributed predominantly to the trace elements of the study’s waters. Diversity of lithology was the main factor affecting their concentrations. In addition, deep circulation controlled by the fault could influence trace-element enrichment. Our results offer a guide for the exploration and use of geothermal resources.

On 23 January 2024, a M_S7.1 earthquake struck Wushi County, Xinjiang Uygur Autonomous Region, marking the largest seismic event in the Southern Tianshan (STS) region in the past century. This study investigates the relationship between hydrothermal fluid circulation and seismic activity by analyzing the chemical composition and origin of fluids in natural hot springs along the Maidan Fracture (MDF). Results reveal two distinct hydrochemical water types (Ca-HCO₃ and Ca-Mg-Cl). The δD and δ¹⁸O values indicating spring water are influenced by atmospheric precipitation input and altitude. Circulation depths (621–3492 m) and thermal reservoir temperatures (18–90 °C) were estimated. Notably, the high ³He/⁴He ratios (3.71 Ra) and mantle-derived ³He content reached 46.48%, confirming that complex gas–water–rock interactions occur at fracture intersections. Continuous monitoring at site S13 (144 km from the epicenter of the Wushi M_S7.1 earthquake) captured pre-and post-seismic hydrogeochemical fingerprints linked to the Wushi MS7.1 earthquake. Stress accumulation along the MDF induced permeability changes, perturbing hydrogeochemical equilibrium. At 42 days pre-Wushi M_S7.1 earthquake, δ¹³C DIC exceeded +2σ thresholds (−2.12‰), signaling deep fracture expansion and CO₂ release. By 38 days pre-Wushi M_S7.1 earthquake, Na⁺, SO₄²⁻, and δ¹⁸O surpassed 2σ levels, reflecting hydraulic connection between deep-seated and shallow fracture networks. Ion concentrations and isotope values showed dynamic shifts during the earthquake, which revealed episodic stress transfer along fault asperities. Post-Wushi M_S7.1 earthquake, fracture closure reduced deep fluid input, causing δ¹³C DIC to drop to −4.89‰, with ion concentrations returning to baseline within 34 days. Trace elements such as Be and Sr exhibited anomalies 12 days before the Wushi M_S7.1 earthquake, while elements like Li, B, and Rb showed anomalies 24 days after the Wushi M_S7.1 earthquake. Hydrochemical monitoring of hot springs captures such critical stress-induced signals, offering vital insights for earthquake forecasting in tectonically active regions.

Identifying reliable geochemical signals that reflect crustal stress evolution remains a major challenge in earthquake monitoring. Spring fluids, due to their deep circulation and rapid response, provide an important window into fault-zone processes. This study presents three years (May 2022–March 2025) of hourly hydrogen gas (H₂) concentration monitoring in spring gases from the Muji Basin on the northern Pamir Plateau, integrated with meteorological and seismic data. H₂ concentrations exhibited a stable diurnal pattern, positively correlated with water and air temperatures and negatively correlated with atmospheric pressure. Short-term anomalies during seismically quiet periods may reflect a combination of temperature-dependent solubility effects and transient degassing caused by localized gas accumulation and sudden release under heterogeneous fault and aquifer conditions. During seismically active phases, sustained increases in H₂ concentrations were also recorded; however, such anomalies did not consistently precede earthquakes, instead reflecting broader phases of tectonic instability and episodic fault-zone degassing. These findings highlight the potential of long-term H₂ monitoring to improve our understanding of the coupling between crustal stress, fluid transport, and degassing processes in tectonically active regions.