The development of remote control technology has grown rapidly along with the development of communication technology nowadays. The simplest communication technology available is by using GSM protocol. In this paper, a prototype of electric appliance control tool via SMS by using GSM is proposed. GSM protocol was chosen because it does not depend on mobile devices' platform. GSM SIM 900 and Arduino for controlling a relay module were utilized here. Relay module worked in accordance with orders given through SMS and the mobile device then received the feedback of the command. For testing purpose, ten (10) different types of input string as a command control was proceed. Relay worked according to orders sent from the input string submitted and feedback messages from the command given previously was provided.
1 June 2019 in Journal of Physics: Conference Series
To keep the server running properly, the temperature and humidity in the server room need to be considered because if the temperature or humidity in the server room is not suitable with standards it will disturb or damage the existing server. For this reason, the condition of the server room must be monitored and the temperature and humidity in the room are maintained. In this work we design a temperature and humidity remote monitoring system and server room using Lattepanda and ThingSpeak to data cloud of monitoring result. The system design process consists of two parts, the first is the design of hardware reading data on the sensor. The second is sending data to ThingSpeak capable to be resuscitated which is can be accessed via internet using a browser. From the results of the test, it can be seen that Lattepanda can be used to monitor temperature and humidity in the server room. The temperature and humidity can be monitored in real time (every 30 seconds) through the channels provided by ThingSpeak.
30 October 2017 in Journal of Physics: Conference Series
Wireless communication has been widely used in various fields or disciplines such as agriculture, health, engineering, military, and aerospace so as to support the work in that field. The communication technology is typically used for controlling devices and data monitoring. One development of wireless communication is the widely used telemetry system used to reach areas that cannot be reached by humans using UAV (Unmanned Aerial Vehicle) or unmanned aircraft. In this paper we discuss the design of telemetry system in UAV using ZigBee protocol. From the test obtained the system can work well with visualization displays without pause is 20 data per second with a maximum data length of 120 characters.
1 May 2019 in IOP Conference Series: Materials Science and Engineering
This paper describes the application of 5S method in welding workshop and to highlight the significant contribution of 5S implementation to organizational progress both in terms of quality, productivity, work safety, and worker moral values. 5S is a work culture includes Seiri, Seiton, Seiso, Seiketsu, and Shitsuke. 5S is used to improve the quality of employees in handling their work activities. Welding workshop at small and medium scale (UKM) usually has a limited work area. Storage of irregular and unclear equipment and materials relates to increase search activity The search activity allows for delay. The key to successful implementation of 5S is the organizational commitment and worker discipline in handling the 5S. The application of 5S in welding workshop requires a storage device in the form of a rack equipment by naming information or information items saved in it. With the implementation of 5s and the procurement of storage rack able to minimize the search activity of 18.75% and the use of space 11.20%.
19 February 2018 in IOP Conference Series: Materials Science and Engineering
This research was conducted at a fertilizer company in Sumatra, where companies that produce fertilizers in large quantities to meet the needs of consumers. This company cannot be separated from issues related to the performance/effectiveness of the machinery and equipment. It can be seen from the engine that runs every day without a break resulted in not all of the quality of products in accordance with the quality standards set by the company. Therefore, to measure and improve the performance of the machine in the unit Plant Urea-1 as a whole then used method of Overall Equipment Effectiveness (OEE), which is one important element in the Total Productive Maintenance (TPM) to measure the effectiveness of the machine so that it can take measures to maintain that level. In July, August and September OEE values above the standard set at 85%. Meanwhile, in October, November and December have not reached the standard OEE values. The low value of OEE due to lack of time availability of machines for the production shut down due to the occurrence of the engine long enough so that the availability of reduced production time.
1 February 2018 in IOP Conference Series: Materials Science and Engineering
Work related musculoskeletal disorders (MSDs), poor body postures, and low back injuries are the most common problems occurring in many industries including small-medium industries. This study presents assessment and evaluation of ergonomic postures of material handling worker. That evaluation was carried out using REBA (Rapid Entire Body Assessment). REBA is a technique to quantize the fatigue experienced by the worker while manually lifting loads. Fatigue due to abnormal work posture leads to complaints of labor-perceived pain. REBA methods were used to an assessment of working postures for the existing process by a procedural analysis of body postures involved. This study shows that parts of the body have a high risk of work are the back, neck, and upper arms with REBA score 9, so action should be taken as soon as possible. Controlling actions were implemented to those process with high risk then substantial risk reduction was achieved.