Bioaerosol particles contribute to the reduced indoor air quality and cause various health issues, thus their concentration must be managed. Air cleaning is one of the most viable technological options for reducing quantities of indoor air contaminants. This study assesses the effectiveness of a prototype multi-stage air cleaner in reducing bioaerosol particle viability and concentrations. The single-pass type unit consisted of non-thermal plasma (NTP), ultraviolet-C (UV-C) irradiation, bipolar ionization (BI), and electrostatic precipitation (ESP) stages. The device was tested under controlled laboratory conditions using Escherichia coli (Gram-negative) and Lactobacillus casei (Gram-positive) bacteria aerosol at varying airflow rates (50–600 m³/h). The device achieved over 99% inactivation efficiency for both bacterial strains at the lowest airflow rate (50 m³/h). Efficiency declined with increasing airflow rates but remained above 94% at the highest flow rate (600 m³/h). Among the individual stages, NTP demonstrated the highest standalone inactivation efficiency, followed by UV-C and BI. The ESP stage effectively captured inactivated bioaerosol particles, preventing re-emission, while an integrated ozone decomposition unit maintained ozone concentrations below safety thresholds. These findings show the potential of multi-stage air cleaning technology for reducing bioaerosol contamination in indoor environments, with applications in healthcare, public spaces, and residential settings.

Ensuring the effective removal of airborne particles is essential for maintaining indoor air quality, particularly in environments with limited ventilation. This study examines how ion polarity regime, voltage, and relative humidity influence aerosol particle removal in a controlled, room-sized chamber (35.8 m³) using a custom-built air ionizer. Experiments were conducted under stagnant and ventilated conditions (0.5 h⁻¹) while varying ionizer polarity (positive, negative, bipolar, alternating), voltage (6 kV, 10 kV), humidity (40%, 70%), and aerosol type (incense smoke, nebulized KCl). Positive and negative unipolar ionization achieved over 90% removal within 60 min, with decay rates of 0.04–0.05 min⁻¹, half-lives of 13–17 min, and clean air delivery rates (CADR) of 60–90 m³ h⁻¹. Bipolar ionization was less efficient due to ion-ion recombination, yielding CADR values below 25 m³ h⁻¹, while alternating polarity improved deposition (40–70 m³ h⁻¹) by reducing recombination losses. Relative humidity had a minimal influence on unipolar performance but moderated efficiency in bipolar and alternating modes. Under low ventilation, unipolar negative ionization sustained high removal (96.7%), while ozone remained below the detection limits of the methods used. These findings indicate that ion polarity control and field strength strongly influence particle removal and that unipolar or alternating-polarity operation can provide effective particle removal under controlled chamber conditions, including a low-ventilation case of 0.5 h⁻¹.