In this paper we discuss and create a MQTT based Secured home automation system, by using mentioned sensors and using Raspberry pi B+ model as the network gateway, here we have implemented MQTT Protocol for transferring & receiving sensor data and finally getting access to those sensor data, also we have implemented ACL (access control list) to provide encryption method for the data and finally monitoring those data on webpage or any network devices. R-pi has been used as a gateway or the main server in the whole system, which has various sensor connected to it via wired or wireless communication.
The behaviour of various families of the antenna structures is studied. In that, CPW (Coplanar Waveguide) fed antennas show better behaviour for the Wireless applications. The slot antenna is used for precise operating frequency, where the frequency spectrum is 2.45 GHz and 5.5 GHz. To achieve the proposed frequency, the slot antenna is fed with Coplanar waveguide is implemented and measured with dimensions of 70 mm × 70 mm. To increase the bandwidth, first the mid section of two short slots of either side of the single pole length is increased slowly to check out the maximum bandwidth. The achieved peak bandwidth gradually starts decreasing at some length, considering the achieved peak value, The length responsible for decreasing peak value is to be noted. Now for obtaining the operating frequency lies in the frequency band, the mid section of long slot has to be decreased gradually; thus, operating frequency shows at 2.45 GHz and 5.51 GHz with return loss of −20 dB, and the whole design is printed on the FR4 substrate for better efficiency to the proposed frequency at maximum bandwidth, and thereafter to check out the characteristics of antenna the parameters such as Return loss characteristics, VSWR, Azimuth pattern, Elevation pattern and 3D distribution pattern
Detection of object boundaries and significant features within an image is one of the most important processes in image processing and computer vision, as it allows the identification of object boundaries and significant features within an image. In applications such as autonomous vehicles, surveillance systems, and medical imaging, real-time processing has become increasingly important, which requires hardware accelerators. In this paper, the improved Sobel edge detection algorithm was implemented using Verilog as an FPGA-based algorithm designed to perform real-time image processing under the Sobel edge detection algorithm for specially RGB images. The proposed design proposes an application of horizontal and vertical Sobel kernels in parallel in order to compute the gradient magnitudes for 1028 × 720 RGB images by taking the gradient magnitudes of 3 × 3 pixel windows. This work focuses on algorithmic complex reduction by using eight directional approaches, and parallel processing leads to reducing the architectural utilization.
25 October 2015 in Transactions on Electrical and Electronic Materials
Design and Performances of Implantable CPW Fed Apollian Shaped Antenna at 2.45 GHz ISM Band for Biomedical Applications Biomedical applications;Implanted antenna;ISM band;Method of moments. Coplanar waveguide feed; A novel implantable CPW fed Apollian shaped antenna embedded into human tissue is proposed for ISM band biomedical applications. The proposed antenna is made compatible for implantation by embedding it in an alumina ceramic substrate(εr=9.8 and thickness= 0.65 mm). The proposed antenna covers the ISM band of 2.45 GHz. The radiation parameters such as return loss, xy-plane, xz-plane, and yz-plane etc., are measured and analyzed using the agilent vector network analyzer. The proposed antenna has substantial advantages, including low profile, miniaturization ability, lower return loss, better impedance matching, and high gain over conventional implanted antennas.