In order to better serve the users of wood desks in open-plan offices, the Kano model is used to analyze the problems encountered by users in the office. Combined with quality function deployment (QFD), this study conducted an analysis of the weighted average of users’ needs and the importance of engineering measures of product technical characteristics. The proposed system uses an integrated Kano–QFD model to identify users’ specific needs and scene experience with a more complete service system. Through the hybrid approach of the Kano model and QFD development and design technology, the wood desks in open-plan offices are optimized to improve the rationality and scientific nature of office furniture and enhance its market competitiveness.
20 February 2017 in Advances in Mechanical Engineering
As an important part of modern furniture, panel furniture already has a large number of consumers and good long-term prospects. Panel furniture is also an important product type in the modern forestry products supply chain. Therefore, scientific qualitative and quantitative evaluation on the design of panel furniture is of great significance. This article focuses on the research of the establishment of an evaluation system at the design stage of panel furniture, according to the concept and feature requirements of panel furniture. The article also establishes a design evaluation system combining Kansei engineering and analytic hierarchy process methods. Additionally, this article will discuss in detail the authors’ methodological approach on the procedures used, statistical methods, and evaluation model of panel furniture design.
The effects of heat treatment on Cupressus funebris Endl. wood were examined under different combinations of temperature, time, and pressure. The chemical composition, crystallinity, and microstructure of heat-treated wood flour and specimens were characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). Vacuum heat treatment led to changes in the functional groups and microstructure of C. funebris wood, and the relative lignin content decreased with increasing treatment temperature, which was significant at lower negative pressures. Cellulose crystallinity showed a change rule of first increasing and then decreasing throughout the heat treatment range, and the relative crystallinity ranged from 102.46% to 116.39%. The cellulose treated at 120 °C for 5 h at 0.02 MPa had the highest crystallinity of 44.65%. These results indicate that although heat treatment can improve cellulose crystallinity, very high temperatures can lead to decreased crystallinity. The morphology and structure of the cell wall remained stable throughout the heat treatment range; however, at elevated temperatures, slight deformation occurred, along with rupture of the intercellular layer.
The effects of wood knots of Chinese weeping cypress (Cupressus funebris Endl.) wood on selected physical and color properties were investigated. Thirty samples of live knots, dead knots, and clear wood groups were selected for experiments to determine the physical properties of wood density, wood shrinkage, wood swelling, and wood color. The experimental analysis results showed that the wood density values are in the order: dead knots > live knots > clear wood, with a significant difference in wood density between different groups (p < 0.01). In addition, the values of the air-dry volumetric wood shrinkage, air-dry volumetric wood swelling, oven-dry volumetric wood shrinkage, and oven-dry volumetric wood swelling ratios are in the order: dead knots > live knots > clear wood, being consistent with a variation in wood density. Three groups of wood colors were provided: the color of clear wood is light, the color of live knots is reddish, and the color of live knots is blackish, in relative terms. The chromatic aberration between the three groups can be identified, and the wood color difference resulted from the discrepancy in the lightness index.
15 August 2022 in Tehnicki vjesnik - Technical Gazette
The influence of body mass index (BMI) on seat comfort was studied. 50 subjects were tested for body pressure distribution experiment about seat factors and BMI, and 118 subjects were tested for comfort survey experiment about the factors combination...
The objective of this study is to determine optimum parameters for double dowels in medium density fiberboard components, and the maximum value of the strength of joints loaded in tension and compression bending. This study analyzes dowel diameter, clearance or interference fit value, and dowel spacing by using the orthogonal experiment method. Optimum parameters for double dowels in medium density fiberboard component structures were obtained by orthogonal experiment and verified by simulation using ANSYS finite element analysis software. Experimental and simulation-based results revealed that the optimal parameters for double dowel joints with maximum tensile strength were a dowel diameter of 10mm, an interference fit of 0,20mm, and a spacing of 64mm.The optimal parameters for double dowel joints with maximum bending strength were a dowel diameter of 10mm, an interference fit of 0,10mm and a spacing of 48mm.