In the present study, a magnetic adsorbent for diclofenac formed by maghemite (γ-Fe2O3) nanoparticles with high saturation magnetization (19.8 emu g−1) and specific area (79 m2 g−1) was synthesized by a one-pot method through the precipitation of Fe2+ ions with NaOH solution followed by rapid oxidation with hydrogen peroxide. The X-ray diffraction and Mössbauer spectroscopy data confirmed that the adsorbent is formed solely by maghemite. The adsorption equilibrium time for diclofenac (C0 = 500 mg L−1) was reached after 120 min, and the kinetic data were best fitted to the pseudo-first-order model. The adsorption isotherms acquired at five different temperatures showed an increase in the maximum adsorption capacity (261 mg g−1) until 298 K, but at higher temperatures, the maximum adsorption capacity was not increased. The isotherm data were best fitted to the Langmuir and Sips models. Adsorption tests as a function of solution pH showed a decrease in the diclofenac adsorption capacity with increasing solution pH, suggesting that the hydroxyl anions compete with diclofenac molecules for the adsorption sites. Diclofenac adsorption on maghemite was endothermic (67.31 kJ mol−1) and entropically driven (TΔadsS° = 96.33 kJ mol−1). Finally, theoretical calculations and infrared spectroscopy data suggest a physisorption mechanism of diclofenac on the maghemite surface.
The effects of solvent on the synthesis of molecularly imprinted polymers (MIPs) for the selective adsorption of quinoline were evaluated in this work. The MIPs were synthesized by the “bulk” method using the quinoline molecule (IQ) as a template in different solvents, such as toluene (MIPT) and chloroform (MIPC). The adsorbents were characterized by thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), and N2 adsorption/desorption measurements. The influences of time, adsorbate concentration, and temperature on the adsorption of quinoline by MIPT and MIPC were evaluated. Maximum adsorption capacities (qe) of 35.23 and 24.10 mg g−1 were obtained for MIPT and MIPC, respectively. Thermodynamic studies indicate that occur physisorption and a spontaneous process (ΔadsG° < 0) entropically directed. Finally, the highest selectivity and reusability of MIPC for quinoline adsorption was ascribed to the better interaction between the chloroform and monomer, which favors the formation of porous adsorbents with higher numbers of adsorption sites.
Oxidation of aniline into valuable products such as azoxybenzene, azobenzene, and nitrobenzene has been a great challenge due to the difficulty of controlling the selectivity of heterogeneous catalysts to form the desired products. In this work, an active and selective heterogeneous catalyst for the oxidation of aniline into azoxybenzene was designed by doping iron oxide supports with niobium and immobilizing Nb-peroxo groups on their surfaces through H2O2 treatment. The Nb-peroxo groups on the iron oxide support were essential to catalyze the conversion of aniline into products while the niobium favored the formation of azoxybenzene. Among the alcoholic solvents studied, 1-propanol was the most suitable to get high conversion rates of aniline and high selectivity to azoxybenzene. At 3 h reaction time, the Nb-peroxo@iron oxides led to oxidation of aniline with a conversion rate of 99.6% and 83.7% selectivity to azoxybenzene at room temperature. Since the selective and catalytic oxidation of aniline is very important for the synthesis of intermediates and precursors to various industrially valuable products, the results shown herein may contribute to the development of most stable, selective, and active catalysts under mild reaction conditions.
14 November 2022 in International Journal of Hydrogen Energy